PDA

View Full Version : Laguna 2 1.9dci EGR OFF and svbl


P2XA
31st March, 2011, 07:11 PM
Hi!Somebody help in remap laguna 1.9dci EDC15C2
I think that egr map is 73da0!?
SVBL need to increasein 30%?
P2XA
31st March, 2011, 07:18 PM
dump here:
carmageddon
4th April, 2011, 04:10 PM
on edc15 try with set on map 73DA0 all value @ 11000...if you dont have limp mode the solution is this...otherwise need disable the control but i can not now
P2XA
4th April, 2011, 05:03 PM
on edc15 try with set on map 73DA0 all value @ 11000...if you dont have limp mode the solution is this...otherwise need disable the control but i can not now
EGR closed but while driving limp mode;need to disable control...
P2XA
5th April, 2011, 02:10 PM
Anybody help me?
monitel_service
6th April, 2011, 06:13 AM
tys is your file
gezame
6th April, 2011, 11:51 PM
tys is your file

Hi
Danger, bad checksum in file.
Regards.
monitel_service
7th April, 2011, 05:22 AM
What software use to write ?
Normally your software need to make the CKS
I can be calculated manually CKS.
gezame
8th April, 2011, 02:04 AM
What software use to write ?
Normally your software need to make the CKS
I can be calculated manually CKS.

Hi
I do not problem, i use cmdflash original, calculate checksum in all ecu suported, edc15, siemens, delphi,etc, etc.
but others, using other interfaces.
Cmdflash only makes writing EDC15 checksum, etc.
Regards.