laguna 2 pin calculated but not accepted

[ricards99]

hi,
i try to program a new card in 2001 laguna 2, but no succes
with zed-bull renault obd cable => error: wrong pin ( calculated by the cable )
with renault explorer no succes => undeffined error
i read uch hc912 and calculate pincode with zed-bull software and try with sbb always no succes =>error wrong pincode

this is the pin code calculated 78 57 A6 2A BF 7E
and i join uch dump
can someone say me if the pin is correct or no
thanks

[elektro128]

5A7584089D5C

check this

regards

[gokey]

Pin Code: 7857A62ABF7E

maybe MCU not read well?

[ricards99]

mcu readed and verified twice, the pin code is the same calculated by sofware and by renault obd cable
i dont understand

[Badger-]

Im getting the same code as you from zed-bull 7857A62ABF7E.
Go over to the IEA forum and send your dump to Army he's normally very helpful.

[Rito]

If you use T-cod do not forget use option dealer code and not advace code.........

[damih]

Hello, you VIN is :VF1BG0G0624303794
and your PIN is:78 57 A6 2A BF 7E or 5A 75 84 08 9D 5C

do you have a valid card and this card start a cars?
if you don't have an other solution try to write your transponder
program your card with hitag in your Zed use a dump off UCH