Astra H lost pin

[mikikarpa]

Dear friend
I have very big problem whit
Astra H 1.7 DTL
BOSCH 0 281 011 943
W0L0AHL4855045459
The problem is:
I read the file of Ecu whit carprog via OBD,I changed km. and
next the pin of ECU is XXXX.
I read thereafter eprom inside in the ecu 95160 and inside in a address in a pin place is FF FF FF FF,EMPTY.
PLEASE FOR HELP!

[lupu_sandu]

And what is the problem?
If you want to program pin, just reset ECU and reprogram.
If you don't have pin from car, read M35080 from dash.

[mikikarpa]

I want pin code,
because car don't start and I don't have pin,I cant make reprogramming ecu.
But in anyway tanks for your Ripley,I didn't know that I can read pin from dash.
Thanks.

[Claudiu_dar]

Read 35080 from dash with upa or x prog and post dump

[mikikarpa]

I read file in dash I see the pin is 6073but the immo sees is notdis pin
when I put the number in a 95160 i ecm steel non recognized the pin.
Can somebody help my or somebody have file from 95160 on dose ecm.
0 284 011 943 bosch

[lupu_sandu]

Do something else, with OP-COM:

Go to CIM>Programming>Programming>Security Code (enter 6073)>Program Immobiliser Function>ECM Installed> Do it>

If you see in white window this message:


Please wait...
Correct Security Code Entered
Successfully Programmed !

Turn ignition off, then try to start car.

[mikikarpa]

I did the same thing that you told me before but the pin code is wrong. The Op - com is showing wrong pin code and I cannot do the programing. I try with 6073.

[lupu_sandu]

Then , try pin 1204

[mikikarpa]

I try but same

[obdmaster]

your vin is W0L0AHL4855045459
security code is 6073
mileage is 105256km

got this from your dash dump

You must be doin something wrong m8, but i have no idea what sorry


What version opcom are you using some have problems in programming try this one m8

http://rapidshare.com/files/429215943/A1-__OP-COM_CHINA_08-2010_EN.rar

[mikikarpa]

:bounce::bounce::bounce::bounce::bounce:
THANKS,THANKS,THANKS........
OP com make problem
THANKS m8.