PDA

View Full Version : Repair abs ecu



marcoco
3rd April, 2011, 01:45 AM
Hi who can hepl me to repair this abs ecu.It's fitted on peugeot car.
http://img651.imageshack.us/img651/7127/1002411u.jpg

http://img233.imageshack.us/img233/231/1002415w.jpg


I have seen that somebody can repair similar ecu (fitted on volvo (VOLVO ABS ECU 850,V70,C70,S80 ABS CONTROL MODULE REPAIR su eBay.it, Other Business Industrial, Business, Office Industrial (http://cgi.ebay.it/VOLVO-ABS-ECU-850-V70-C70-S80-ABS-CONTROL-MODULE-REPAIR-/280640041769?pt=LH_DefaultDomain_3&hash=item4157733329))

Many thanks for help

powerpower
3rd April, 2011, 11:53 AM
hi
what is the problem with ecu
error codes ?

marcoco
3rd April, 2011, 12:00 PM
With diagnostic: " internal error"

bgcomp80
3rd April, 2011, 02:29 PM
You need to resolder this chip .

57126

Twist
9th April, 2011, 02:31 AM
You need to resolder this chip .

57126

how do you meen resolder? onlu to warm up a contacts?
:stoned:

Twist
9th April, 2011, 08:07 PM
You need to resolder this chip .

57126

did you mean solder chip off the board, and solder it on the board?

elchip
9th April, 2011, 10:54 PM
did you mean solder chip off the board, and solder it on the board?
Resolder - reheat:canabis:

bgcomp80
13th April, 2011, 09:11 PM
Just reheat, i did not try to remove the chip .

Twist
14th April, 2011, 10:31 PM
thanks friends! :)

churry
20th April, 2011, 05:26 PM
You need to resolder this chip .

57126

Hola como puedo obtener las imagenes de las unidades de airbag para cualquier modelo de coche.

Para saber el chip que debo de desoldar a continuacion leer la eeprom y volverlo a resetear.



estoy usando el tachosoft airbag resetter para ver la eeprom que tengo que usar de acuerdo al modelo de coche.

Pero necesito la imagen de cada unidad de airbag y que venga se?alado el chip a resetear.


Espero vuestras respuestas

Muchas gracias

javiercj
20th April, 2011, 06:49 PM
You need to resolder this chip .

57126

Hi how I can get pictures of the units
airbag for any type of car.

For I know the chip desoldering below
eeprom and read it again to reset.



I'm using the program tachosoft airbag resetter to view
eeprom used according to the type of car and the airbag unit.

But I need the image of each unit and airbag
identify the chip to reset.


I await your responses

Thank you very much

centrohifi
20th April, 2011, 08:18 PM
the mosfet top left is... good? try the power, and if you feel warm ..