View Full Version : Tacho Universal OBD Cable 27 schematic
Mario32
4th April, 2011, 01:31 PM
Hi Friends,
Can someone please give me schematic from cable 27.
Thanks in Advance.
teerak2uk
5th April, 2011, 09:54 AM
Here is cable schemes
Mario32
5th April, 2011, 10:32 AM
Hi,
Thanks fore the reply and schematics from the cables.
I already have these ones from cable 27 I cant find any schema cable 27 is the one that is used fore VAG and Opel with Kline.
The one I have don't work with opel group I use fore these cars OP-COM.
Thanks in Advance.
teerak2uk
5th April, 2011, 10:34 AM
what model did you try to use your 27 cable on?
skcaki
5th April, 2011, 12:42 PM
Bad cable, pin 12 on OBD connector is not connected to K-line.
Mario32
5th April, 2011, 03:13 PM
I have measured the connection between pin 12 from obd to sub-d and there is no connection.
To witch pin from sub-d must it be connected?
skcaki
5th April, 2011, 04:05 PM
sub-d 23+24
Mario32
5th April, 2011, 06:04 PM
sub-d 23+24
Thank you fore the information I will make this connection.
skcaki
5th April, 2011, 11:05 PM
pin3 and pin7 on OBD are already connected to pin 23+24 sub-d. You can try to connect pin3 and pin12 on OBD pin side, becouse it's impossible to disassemble connector.
marcosbgarcia
7th April, 2011, 01:31 AM
Hi Friends,
Can someone please give me schematic from cable 27.
Thanks in Advance.
Try this, my cable is the same.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.