PDA

View Full Version : Skoda fabia 2005 damaged dash 6Y0920881D



meteor80
5th April, 2011, 09:35 AM
Hello.
I have in my garage skoda fabia 2005.
I think that someone was trying to change mileage but he used wrong method.
Dash model is 6Y0920881D VDO.
Now dash displays "error" and i cannot to connect with dash and immo too. Only airbag lamp is on.
Also displays "miles" but it should be km. Motor doesn't starts - blocked by immobiliser.
Does someone have solution for that problem?
It can be dash dump, it can be also with immo off.
Thanks in advance.

potatodog
6th April, 2011, 02:56 PM
Upload dump 93C86 but i think dump is damaged.
You can burn good dump and add with VCDS... PIN you get from ECU.

meteor80
7th April, 2011, 09:38 AM
Original dump was damaged.
It was completly different that correct dump from other dash.
This dump i have from other dash.
What is procedure to add this dash?

I need to say that VW group is not my strong point.
I have such tools:
VAG COMMANDER 1.4
VCDS 10.6
TACHO USB 1.7
XPROG-M
Can You help me how to program this dash- step by step?

milanoffracing
7th April, 2011, 10:08 AM
Original dump was damaged.
It was completly different that correct dump from other dash.
This dump i have from other dash.
What is procedure to add this dash?

I need to say that VW group is not my strong point.
I have such tools:
VAG COMMANDER 1.4
VCDS 10.6
TACHO USB 1.7
XPROG-M
Can You help me how to program this dash- step by step?

Here are details from your dump: 91220 km, PIN: 9543, Dash number: 6Y0 920 881M V0.2. If you want to add this dash you need to read old pin from ecu and after that you can use VCDS to add the dash.Here you can read how to swap the dash: Immobilizer - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer#Immobilizer_Generation_3)

meteor80
7th April, 2011, 10:31 AM
How to read old pin from ecu?

potatodog
7th April, 2011, 03:28 PM
Try with Commander 1.4
The 6Y0 920 881M is from 1,2l Benzin.... RPM and Oil-level should be different. Contact me if you need help to fix this problem

meteor80
7th April, 2011, 11:38 PM
Hi Potatodog.
You are right. The RPM and OIL level are diffrent. Please tell me how to repair that.
Thanks in advance.

potatodog
8th April, 2011, 10:17 PM
Use PN....