blue screen of death

[jinkie]

hello i was looking for help with this my laptop has stoped working and this screen has came up with the error 0x0000007B (0x80786b58, 0xC0000034, 0x00000000, 0x00000000). is there any way of fixing these i have tryed to run safe mode but it does not let me run anything thanks for any help i am running windows 7

[smoggy]

googling that error gives plenty of hits and seems to suggest the error is associated with an inaccessible boot device
have a read here in particular number 8 STOP 0x0000007B - STOP 0x7B INACCESSIBLE_BOOT_DEVICE - Fix STOP Error 0x0000007B (http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm)

[jinkie]

i have removed the harddrive and replaced it with the harddrive from my old laptop and tryed to install windows 7 but still the same prob

[pk.evolved]

Have you messed around with BIOS. If you did you may have changed HDD SATA mode (AHCI or IDE). Try fixing that in BIOS.
Good luck !

[jinkie]

thanks for helping but i dont know how to change anything in bios how do i do that

[pk.evolved]

It depends who is laptop manufacturer and what model is it.
But if you haven't changed anything in BIOS, I don't think that SATA mode is the problem.

[jinkie]

the laptop is a asus k5oij and i was using windows 7

[pk.evolved]

ok, when you power on your laptop, you will have to access the bios by pressing certain button, as shown on screen (for example "PRESS F2 to enter setup" or something like that. When you access bios, you will have to find something like device configuration or similar, and from there hdd settings and change the hdd mode. I can't tell you all in details because I don't know how does your laptop bios look like.

[jazzipup]

Does it give anything errorwise like "Inaccessible boot device" ?
Did you install any new drivers or software prior to it failing/blue screening?

[pk.evolved]

yes, reason can be new hardware , drivers, etc.
But I don't think that new drivers are problem since he used new hdd for new win installation, and again got the BSOD.
" STOP 0x0000007B - STOP 0x7B INACCESSIBLE_BOOT_DEVICE - Fix STOP Error 0x0000007B (http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm)" that is the error mate, so i think that the conf. in bios (hdd mode ) is the reason.

[jinkie]

thank you for all your help i tryed changing things in bios and that worked its loading windows 7 so again thanks

[pk.evolved]

No problem, DK is all about sharing and helping.

Regards

[kaToo]

I have the solution
I have same problem with acer aspire
All you have to do is
Open motherboard and than Solder the Grafic card procesor
How to do It :
If it has Integrated graphic you with se the graphic card procesor
Than you need to solder it with hot air
all you have to do is put hot air uper the graphic procesor and pull it down with something when soldering and let pc 1 minute and after that you will start it without problem

P.S sorry for my english

[enterprise1701]

I have the solution
I have same problem with acer aspire
All you have to do is
Open motherboard and than Solder the Grafic card procesor
How to do It :
If it has Integrated graphic you with se the graphic card procesor
Than you need to solder it with hot air
all you have to do is put hot air uper the graphic procesor and pull it down with something when soldering and let pc 1 minute and after that you will start it without problem

P.S sorry for my english??????????????????????????????????????????? ????????????????????????

[jetdede]

my god...u can make motherboard broken