View Full Version : 2005 Acura MDX -USA
tima
8th April, 2011, 04:18 AM
I have a 2005 Acura MDX which I am trying to correct. Any solution to do this one without removing the needles. I have attached a few pics of the cluster. Any assistance appreciated.
thanks
Speedoman57
8th April, 2011, 06:11 AM
This should help you out just open the .doc file and it has a image of the back way in the cluster do not remove the needle. please let me know what you get
tima
10th April, 2011, 02:52 AM
This should help you out just open the .doc file and it has a image of the back way in the cluster do not remove the needle. please let me know what you get
Thanks for the pic, however I cant seem to find the points that you have included in the pic on this cluster.
Speedoman57
11th April, 2011, 09:07 PM
this is where it was on mine. red mark is where the location is, let me know what you get
prckybgd
5th June, 2012, 04:24 AM
Can you please e-mail me dump from the memory (93C56) my L56R died and I replace chip but do not have working dump.
( no addys :rulez: )
Michaelescobar
12th March, 2019, 05:39 AM
Can you post the cluster picture with the solder points pin out please ,thanks
Michaelescobar
12th March, 2019, 04:21 PM
Speedoman can you send me a picture of the 2004 mdx cluster solder points, pin out, with out moving the needles.thanks a lot.
Michaelescobar
12th March, 2019, 06:46 PM
Speedoman57, Can you send me this picture please, of 2004 Acura mdx solder point on the back of the cluster.I dont want remove the needles.thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.