problem read Sky card

[okverd]

Hello everyone, I hope someone can help me this is driving me crazy.

I followed a tutorial of using latest Oscam to get the white card working in the internal slot. Im using a clone DM800, image latest Nemesis 2.2 with 76D bootloader.
All working fine, just sometimes small freezes and EcmOK show max 76%. I have only 4 user acounts.
Please have a look if my configs are good.
Why I cant get EcmOK better reading?
Do I need insert the boxkey?? Now working without boxkey.
Maybe I have to buy better card reader: Smargo, or Emikey reader??
Thank you very much for help.

====Oscam.cfg====
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log

[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0963:000000

=== == Oscam.Server ===========
[reader]
label = SkyUK
Protocol = internal
detect = CD
device = /dev/sci0
Group = 1
EMMCache = 1,3,2
#BoxID = xxxxxxxx
CAID = 0963
ident = 0963:000000

==== Oscam.User =====
[account]
user = user
pwd = pass
group = 1
au = SkyUK

[jfish]

Hello everyone, I hope someone can help me this is driving me crazy.

I followed a tutorial of using latest Oscam to get the white card working in the internal slot. Im using a clone DM800, image latest Nemesis 2.2 with 76D bootloader.
All working fine, just sometimes small freezes and EcmOK show max 76%. I have only 4 user acounts.
Please have a look if my configs are good.
Why I cant get EcmOK better reading?
Do I need insert the boxkey?? Now working without boxkey.
Maybe I have to buy better card reader: Smargo, or Emikey reader??
Thank you very much for help.

====Oscam.cfg====
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log

[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0963:000000

=== == Oscam.Server ===========
[reader]
label = SkyUK
Protocol = internal
detect = CD
device = /dev/sci0
Group = 1
EMMCache = 1,3,2
#BoxID = xxxxxxxx
CAID = 0963
ident = 0963:000000

==== Oscam.User =====
[account]
user = user
pwd = pass
group = 1
au = SkyUK

The freezing may be due to the card being overclocked - set the following in the oscam.server file under reader section

mhz = 357
cardmhz = 357

[dctyper]

simple dont use oscam use cccam

clocking the card in and internal reader does not work it is set to default.

dc

[Ansem]

remove the # from this line and reboot


#BoxID = xxxxxxxx

[davvo]

this is just for local card 0963

just use these lines
dont keep adding things
keep it basic

chmod the files

right click the file click attribute
for all oscam configs its 644
oscam bin is 755



[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

# protocols

[newcamd]
key = 0102030405060708091011121314
port = 12000@0963:000000;12001@0963:000000

[reader]
label = slot1
protocol = internal
device = /dev/sci0
boxid = yourboxid
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

[account]
user = user
pwd = pass
group = 1,2
au = 1
caid = 0963

[jfish]

remove the # from this line and reboot


#BoxID = xxxxxxxx

the new version doesnt require the boxid as it detects if when the card is read.

[dctyper]

this is way too complicated and can cause the glitching you are getting

follow my guide for perfect viewing

http://www.digital-kaos.co.uk/forums/f39/cccam-tut-s-y-tv-cards-188336/

dc

[gsmtech]

this is way too complicated and can cause the glitching you are getting

follow my guide for perfect viewing

http://www.digital-kaos.co.uk/forums/f39/cccam-tut-s-y-tv-cards-188336/

dc

You may not have a choice soon, have you noticed PickTV doesnt clear if you use CCCam to read the card ? This channel clears fine with OScam..
This is reported to be due to testing of a new anti CS algorithm, so if other channels, sports, movies etc get moved to the new scheme...CCCam wont clear them anymore...now as CCCam is not actively developed anymore...the only option is to swap to OScam..
I would start looking into OScam if I were you..

[okverd]

Thank you very much for your answears.
Yes, I want to use only Oscam, but Im not happy with the freezing. Ecm is low @100ms.
Im tried many Oscam settings and sat boxes DM500, DM800, DM8000 and still same.
Just desaded to buy external card reader - Smartmouse:
Smartmouse Easymouse 2 USB Programmer Neu | eBay UK (http://cgi.ebay.co.uk/Smartmouse-Easymouse-2-USB-Programmer-Neu-/280593629125?pt=TV_Sat_Zubeh%C3%B6r&hash=item4154aeffc5)
Then easy to change voltage to 3.3V, because in SKYBOX from SKY the card is readed 3.3V and in Dreamboxes 5V.
Please point me if Im wrong.
Cheers mates

[davvo]

try a newer version of oscam

to upgrade oscam
download the version you want from ump2002.net
unzip and you should see all these files (below)
pick the one for your box mine is DM800
SO I USE
oscam-svnX-mips-tuxbox
rename it to oscam
ftp to usr/bin
right click the file click attribute
and click 755
restart oscam

that will upgrade oscam to the version of your choice

now to change the name of oscam version
you have to do it manual
ftp to /usr/camscript
find your oscam
right click the file click rename

example if i was to upgrade to Oscam4856

from Oscam2901

i would rename this

Ncam_Oscam2901_CCcam213.sh

to this
Ncam_Oscam4856_CCcam213.sh

now when you push the blue button it will show the correct version








- oscam-svnX-arm-coolstream Coolstream
- oscam-svnX-x86_64-pc-linux 64 Bit Linux PC
- oscam-svnX-mips-freetz Fritzbox Router
- oscam-svnX-mips-tuxbox DM500HD, DM800, DM7025, DM8000
- oscam-svnX-powerpc-tuxbox DM500, DM500+, DM600, DM7000, DM7020
- oscam-svnX-tripledragon Triple Dragon

[jhalvarez]

what is te lastest oscam?

[jhalvarez]

can oscam read p5 sky card?

[jhalvarez]

I?ve measured the supply votaje to the card in the new dreambox 500s clone and it has 3.3 v, maybe the old boxes had 5v, I read a p3 sky card and it works fine.

Those boxes don?t need any change in the power supply of the drambox 500s.

[davvo]

what is te lastest oscam?

it changes by the day/hour

as of now its oscam-svn5001


im using build 4856

[okverd]

davvo - thank you very much.
Im upgraded Oscam, switched off Cccam and turned "dvbapi On" Now its look great no more freezing and ecm is only 10 ms.
You are top geezer mate..
Many thanks again for help
ta:beer:

[scudno1]

try a newer version of oscam

to upgrade oscam
download the version you want from ump2002.net
unzip and you should see all these files (below)
pick the one for your box mine is DM800
SO I USE
oscam-svnX-mips-tuxbox
rename it to oscam
ftp to usr/bin
right click the file click attribute
and click 755
restart oscam

that will upgrade oscam to the version of your choice

now to change the name of oscam version
you have to do it manual
ftp to /usr/camscript
find your oscam
right click the file click rename

example if i was to upgrade to Oscam4856

from Oscam2901

i would rename this

Ncam_Oscam2901_CCcam213.sh

to this
Ncam_Oscam4856_CCcam213.sh

now when you push the blue button it will show the correct version








- oscam-svnX-arm-coolstream Coolstream
- oscam-svnX-x86_64-pc-linux 64 Bit Linux PC
- oscam-svnX-mips-freetz Fritzbox Router
- oscam-svnX-mips-tuxbox DM500HD, DM800, DM7025, DM8000
- oscam-svnX-powerpc-tuxbox DM500, DM500+, DM600, DM7000, DM7020
- oscam-svnX-tripledragon Triple Dragon
hi davvo at the moment i have a debain linux pc server and im running newcs to read card with a N:line in cccam and give my family c:lines if i use oscam would i stll beable to give out clines,can i just replace newcs with oscam and keep things the way i have it just now.

[davvo]

would i stll beable to give out clines,can i just replace newcs with oscam and keep things the way i have it just now.

yes and no

yes to the lines

no to keep things the way i have it just now

you need to learn a bit about oscam

[micflair]

Ive been doing some reading as Im thinking of switching from CCcam to oscam, its a bit daunting at the moment, maybe our resident oscam expert Davvo would like to do us a newbie tutorial :)

We love ya :)

[davvo]

im no oscam expert

just passing on what i know

oscam requires a bit of reading and a bit of thought
and a bit of tinkering with yer box lol

the worst you can do is ~~~~ it up :)

[micflair]

im no oscam expert

just passing on what i know

oscam requires a bit of reading and a bit of thought
and a bit of tinkering with yer box lol

the worst you can do is ~~~~ it up :)

Yeah its tinker time for me soon.. looking forward to it.. not. haha

[southpaw]

Ive been doing some reading as Im thinking of switching from CCcam to oscam, its a bit daunting at the moment, maybe our resident oscam expert Davvo would like to do us a newbie tutorial :)

We love ya :)

problem is all the info is spread over various threads , a simple step by step guide would help massively , if sly going down the picktv road , i can see this issue popping up a lot more in future

[davvo]

SOUTHPAW a simple step by step guide would help massively you already have one

the guide and files for pick tv is on page 2 here

http://www.digital-kaos.co.uk/forums/f39/oscam-cccam-2-1-3-a-198102/index2.html

if you have a later verision of oscam leave the boxkey bit out

the guide to upgrade oscam to a later verision is in THIS thread

apart from having oscam installed on your box
you dont need anything else

the only thing left to do is DO IT lol

[davvo]

if you use a DM800 SIM 2.01
and want a good image with oscam/cccam2.1.3 in the Addons server
try
DREAM ELITE V.133DV3 PHOENIX EDITION

[TcG1]

Didnt think the dreamelite server was running?? so therefor any addons need to be either added manually or downlooad the tunisiasat ipk and use there server for addons?

TcG1

[satsmo]

There is an extra url available for it or as said the tunisiasat ipk will do the job.

[davvo]

in that image the Addons server works
by default ie no need to add anything

[TcG1]

Cheers Davvo, nice to know which ones do an dont have a working server,

[satsmo]

in that image the Addons server works
by default ie no need to add anything

Not in the first edition after a while the server was taken offline :) Later mod was done with extra url for later downloads.

[davvo]

this is for dm500 all done for you just put card in
not my work

google it


S*Y UK ready Nabilosat Oscam+CCcam2.1.3 DM500 clone Backup

This image is S*y UK ready with all Oscam configs and N line in CCcam.cfg.
CCcam 2.1.3
Oscam
Latest CCcam Channel info
Latest CCcam Providers
SGTFlipFlop ENiGMA2 28.03.11 (Multi)

Use Flashwizard to flash this Backup

[gsmtech]

this is for dm500 all done for you just put card in
not my work

google it


S*Y UK ready Nabilosat Oscam+CCcam2.1.3 DM500 clone Backup

This image is S*y UK ready with all Oscam configs and N line in CCcam.cfg.
CCcam 2.1.3
Oscam
Latest CCcam Channel info
Latest CCcam Providers
SGTFlipFlop ENiGMA2 28.03.11 (Multi)

Use Flashwizard to flash this Backup

Is there no image with a newer version on CCCAm like 2.1.4 or 2.2.1 + OScam ??

Does 2.1.3 even support auto updates of a 0963 card ? Only advantage of 2.1.3 I can see is the 256 trick to report card as local...otherwise it's an old version..better to use newer versions.

[davvo]

yeah there is a image with oscam and cccam 2.2.1

Gemini-470 Backup cccam-221+Oscam 20.03.2011 KaYaCaN

but its not laid out on a plate (spoon fed)
like the
S*Y UK ready Nabilosat Oscam+CCcam2.1.3 DM500 clone Backup


for peeps who have a dm500
and have not got a clue about oscam
the S*Y UK ready Nabilosat image
is a no brainer

oscam auto updates the card
it dont matter what cccam is used

[videoguard2-reader] type: VideoGuard BSkyB - New
[videoguard2-reader] type: VideoGuard, caid: 0963, serial: xxxxxxxxx, BoxID: xxxxxxx
[videoguard2-reader] tier: 0003, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: 000b, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: 001d, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b765, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b766, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b772, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b773, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b860, expiry date: 2011/05/28-00:00:00

[davvo]

heres another dm500 image with oscam

DM500S EDG-Nemesis 4.4 BlackMatrixSilver CCcam2.1.4+Oscam 19.10.2010

[davvo]

i think iv done the oscam bit to death now
just leave whoever is upgrading to oscam to get on with it
:)

[gsmtech]

yeah there is a image with oscam and cccam 2.2.1

Gemini-470 Backup cccam-221+Oscam 20.03.2011 KaYaCaN

but its not laid out on a plate (spoon fed)
like the
S*Y UK ready Nabilosat Oscam+CCcam2.1.3 DM500 clone Backup


for peeps who have a dm500
and have not got a clue about oscam
the S*Y UK ready Nabilosat image
is a no brainer

oscam auto updates the card
it dont matter what cccam is used

[videoguard2-reader] type: VideoGuard BSkyB - New
[videoguard2-reader] type: VideoGuard, caid: 0963, serial: xxxxxxxxx, BoxID: xxxxxxx
[videoguard2-reader] tier: 0003, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: 000b, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: 001d, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b765, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b766, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b772, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b773, expiry date: 2011/06/10-00:00:00
[videoguard2-reader] tier: b860, expiry date: 2011/05/28-00:00:00

Ok, but will OSCAM update entitilements automatically using EMMS recieved from CCCam clients.

For example, card is in DM500C (cable version) so no direct satellite feed possible, hence emms to update entitlements are recieved from clients. This could also for example be a linux PC server with external card reader...

This works fine in a pure CCCam environment, just wondering if you use OSCAM as the reader, and CCCam for reshare to Local LAN clients via N line. Will OSCAM still auto update the card entitlements from clients emms recieved via CCCam ??

[davvo]

i dont know m8
all i know is if you stick a sly card in the slot
and have oscam running it will update the entitilements

im no expert on oscam
but what i did do is take a bit of time
to have a read
test what i read
and pass it on
perhaps a few others who have had a read
should chip in and contribute
cuz i think iv done my bit DONT YOU

if you wanner few answers
get yer nut round this lot
cuz thats what i did
http://streamboard.gmc.to/wiki/index.php/OSCam/en

and if you want to know about what you just ask ME
in your above post
why dont you install oscam
and try it yourself then you will know

forum know it alls iv shit em

opps im one lol

and dont forget to say thanks
cuz you WILL use some if not all of my info

[gsmtech]

i dont know m8
all i know is if you stick a sly card in the slot
and have oscam running it will update the entitilements

im no expert on oscam
but what i did do is take a bit of time
to have a read
test what i read
and pass it on
perhaps a few others who have had a read
should chip in and contribute
cuz i think iv done my bit DONT YOU

if you wanner few answers
get yer nut round this lot
cuz thats what i did
OSCam/en ? Streamboard Wiki (http://streamboard.gmc.to/wiki/index.php/OSCam/en)

and if you want to know about what you just ask ME
in your above post
why dont you install oscam
and try it yourself then you will know

forum know it alls iv shit em

opps im one lol

and dont forget to say thanks
cuz you WILL use some if not all of my info

Thanks, found the answer... below info in OSCAM Wiki.

AU over CCcam

Many people still use CCcam as client, but unfortunately AU will not work with the CCcam protocol. For AU to work, you should set up OScam and CCcam to use CAMD3 protocol, with an L line in CCcam.cfg. The following is an example of two S02 cards which are updated by a CCcam client through the NewCamd protocol (N Line).

Warning: When using the NewCamd protocol, always set AU directed at a reader. Setting "au = 1" will not work properly!

CCcam.cfg

# NewCAMD CONNECTIONS **************************************
#N: <IP> <Port> <Username> <Password> <Description Key (14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
N: 192.168.0.1 4711 dm800_1 dm800 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.0.1 4712 dm800_2 dm800 01 02 03 04 05 06 07 08 09 10 11 12 13 14

oscam.conf

[newcamd]
port = 4711@1702:000000;4712@1702:000000 # each card with its own port
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.0.0-192.168.0.255

oscam.user

[account]
user = dm800_1
pwd = dm800
au = mm_sky # AU for the mm_sky reader
services = mm_sky,sa_sky # ... but access both readers, for Load Balancing to work ;)
group = 1,2 # (see above)

[account]
user = dm800_2
pwd = dm800
au = sa_sky # AU for sa_sky reader
services = mm_sky,sa_sky # ... but access both readers, for Load Balancing to work ;)
group = 1,2 # (see above)

oscam.services

[mm_sky] # SKY: Complete
caid=1702
provid=000000
srvid=0008,0009,000A,000B,000C,000D,000E,000F,0010 ,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B ,001C,001D,0022,0024,0029,002A,002B,0032,0034,0035 ,003C,003D,003E,003F,0041,0042,0043,0044,0075,007A ,007B,007C,007E,007F,0080,0081,0082,0083,0084,0096 ,0097,0098,0099,009A,009B,009C,00A8,00DD,00DE,00DF ,00FB,00FC,00FD,00FE,0105,0106,0107,0108,010F,0110 ,0111,0119,011A,011B,0123,0124,0125,012D,012E,012F ,0137,0138,0139,0141,0142,0143,014B,014C,014D,0156 ,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206 ,07FF,2EFE,3331,3331,3394,4461,4462,6FF1,7009,700A

[sa_sky] # SKY: World, Film, Erotic, Select, Radio
caid=1702
provid=000000
srvid=000E,000D,000C,0034,00A8,001B,002A,0024,0032 ,001D,0016,0022,001C,001A,0013,0206,0018,0015,000A ,000B,002B,0009,0008,0014,0029,0019,0203,0011,00FB ,0105,010F,0119,0123,012D,0137,0141,014B,00FE,0108 ,0099,009A,009C,0096,0098,0097,009B

- I will have a play with this when I get a chance, not entirely 100% on how this works, im guessing the CCCam clients that are sending EMMS to the server, need a N line in their CCAM.cfg instead of a C-Line. Then the CCAM.cfg on the server thats talking to OSCAM needs an L-line added, the other CCAM clients can keep the standard C-lines..

[jfish]

Ok, but will OSCAM update entitilements automatically using EMMS recieved from CCCam clients.

For example, card is in DM500C (cable version) so no direct satellite feed possible, hence emms to update entitlements are recieved from clients. This could also for example be a linux PC server with external card reader...

This works fine in a pure CCCam environment, just wondering if you use OSCAM as the reader, and CCCam for reshare to Local LAN clients via N line. Will OSCAM still auto update the card entitlements from clients emms recieved via CCCam ??

this works prefectly

I have a DM 500C with a sly card - only allow one client to update EMM - dont use cccam due to security issue, but use MgCamd - in the oscam users files, I have set on user to allow AU and not others - and this works prefectly. I have a DM500S that updates EMM's.