PDA

View Full Version : Audi A6 TDI V6 2.5



ftvwdlt
13th April, 2011, 05:47 PM
Hello everybody,
this is my first try to disable immo. It's a Audi 2.5 TDI V6 engine from 2001 in a VW T3.
I didn't find any information about this ECU:
EDC15M-4.3, B 281 010 894
It seems already been tuned professionally.

I found a 24C02 on the back of the board. I dumped this one and the two ROMs on the front (AM27C010).

Which one is needed and what to do with it?

Thanks!

lupu_sandu
14th April, 2011, 09:48 AM
Eeprom 24c04

ftvwdlt
14th April, 2011, 01:59 PM
Thanks a lot for helping, I attached the dump of the 24C04.

lupu_sandu
14th April, 2011, 10:24 PM
Your read as 24c02 m8.
Read again as 24c04

ftvwdlt
30th April, 2011, 09:03 AM
I rechecked the ECU and found B58253, so this should be a 24C02. Seems that I've swapped something.

ftvwdlt
9th May, 2011, 02:55 PM
Anybody an idea?
There are the 24C02 and two AM27C010 on the ECU.

Thanks..

immokill
9th May, 2011, 03:52 PM
Hello
on same ecu I put this dump and start the car.
Please try and report


Regards

ftvwdlt
2nd July, 2011, 08:43 PM
Finally I got the car back to work and was able to check the dump.
Result: Works perfectly. Thank you!