PDA

View Full Version : Sprinter 3.0 CDi V6 184 HP DPF OFF problem ECUSafe original



dieseltechnika
14th April, 2011, 08:51 AM
Hello guys,

I'm writing this post because I have a huge problem with DPF OFF in Mercedes Sprinter 3.0 CDi V6 184 HP with EDC16. I read/write it by KESSv2. Anyway I will describe you the problem.

In the car strange things happen. I wrote into ECU the dump with removed DPF from ECUSafe (different version, last one from 2.0.0.0) and still the same things happen. It looks thereabouts that:

My customer started enignie. Everything seems to be good untill he started driving. When he did it the system begin the burining process of DPF. What is weird in ECU doesn't any errors on original and DPF remove files. WE CHANGE THE AIR FLOW FOR NEW ONE AND EGR FOR NEW ONE and still is the same shit. I don't know what can I do, please help me.

Car ecu data:

A 642 150 12 72
0 281 014 204
1037505819

What can I do ? Should I make a eeprom memory ?

In attechment I put files from diffrent version of ECUSafe and from ECUSafe support.

macxlulu
14th April, 2011, 09:39 AM
regeneration still work ,you must remove fap manually, ecusafe not work

dieseltechnika
14th April, 2011, 12:41 PM
What do you mean manually ? I have to off DPF in map by myself or I have to throw filter away ?

Can you do map well ?

macxlulu
14th April, 2011, 02:41 PM
you have to manually disable the fap file, look for a switch and turn off, otherwise you will always have a problem with the recovery, I know because I also had a problem with sprinter

grinovsky
14th April, 2011, 03:44 PM
try with this solution and repport

dieseltechnika
14th April, 2011, 08:03 PM
OK, I will try and ley you know tomorrow.

ecutuners
14th April, 2011, 08:50 PM
Force a regen of dpf re read the file then use ecusafe this process works I have tested myself on same engine but in s320 car thanks

dieseltechnika
15th April, 2011, 08:44 AM
Force a regen of dpf re read the file then use ecusafe this process works I have tested myself on same engine but in s320 car thanks


There is a little problem with regeneration because in this car physical part of filter was removed. The part of filter from AUSPUFF. What is more error from the ECU is related with DPF so I can't do regeneration. On the original file I have this error, look at screen

mercis
15th April, 2011, 10:30 AM
first make your dpf clean

dieseltechnika
15th April, 2011, 08:01 PM
first make your dpf clean

What do you mean clean ?

mercis
16th April, 2011, 03:26 AM
is your dpf full,cant help ecusafe

dieseltechnika
17th April, 2011, 06:38 PM
is your dpf full,cant help ecusafe

The topic is closed. Customer bought new filter.

Thanks.

Bazil_mb
17th April, 2011, 10:12 PM
Hi,
Tips for Mercedes Benz:
Before removig dpf,egr clear fault memory, and in control unit adaptation make adjustement for new air filter,new air flow, teach new diesel particulate filter.
Check whether the catalyst is also not full and make few holes (drills 12-16 mm for wall),do not remove completly .The same procedure for dpf.
In this way will not affect egr flow, exhaus back pressure.
Try

dieseltechnika
18th April, 2011, 10:38 AM
Hi,
Tips for Mercedes Benz:
Before removig dpf,egr clear fault memory, and in control unit adaptation make adjustement for new air filter,new air flow, teach new diesel particulate filter.
Check whether the catalyst is also not full and make few holes (drills 12-16 mm for wall),do not remove completly .The same procedure for dpf.
In this way will not affect egr flow, exhaus back pressure.
Try

Maybe next time I will try. Anyway thanks.

tuningschool
20th April, 2011, 09:32 PM
No problem in disabling EDC16 mercedes sprnter.
100% filter removed 100% filter disabled. ;)

Bazil_mb
20th April, 2011, 09:58 PM
Not in all the case.If you are latest version of the software in CDI ecu will have errors. Dealers are advised to load the latest sw version in the client van, and ecusafe fail, ceck engine light its on.

dieseltechnika
21st April, 2011, 11:39 AM
No problem in disabling EDC16 mercedes sprnter.
100% filter removed 100% filter disabled. ;)

You are so great :D. Bravo. Can I take a picture with you ?

benyse
4th May, 2011, 10:47 AM
hy , please remove the dpf for me . Sprinter 518CDI

dieseltechnika
5th May, 2011, 08:13 AM
hy , please remove the dpf for me . Sprinter 518CDI

This is from ECUSafe

benyse
5th May, 2011, 01:01 PM
This is from ECUSafe
thanks . ecusafe is work on this car ? really ?

grigorean_alexandru
30th May, 2011, 10:43 AM
No problem in disabling EDC16 mercedes sprnter.
100% filter removed 100% filter disabled. ;)

How did you do it?
The sprinter i am talking has the DPF removed and i need to make it OFF too.

Thank you!

znoki
9th November, 2011, 01:09 AM
Hi all,
My problem is very similar: I need to switch the DPF off in a Chrysler 300C 3.0 V6 CRD.
It has an EDC16CP31-8 ECU, (0281012080, 1037395258, P04896420AF) Exactly same ECU as a Mercedes.
87869
Working file please, because ECUSafe can not do it!
Thx!

lulu2003
6th January, 2012, 03:45 PM
someone familar with type of engine besides DPF?

znoki
8th January, 2012, 11:00 PM
I solved my problem...

waldi1979
15th March, 2012, 11:42 AM
How ????????????????

macxlulu
15th March, 2012, 12:36 PM
by paying for a file, I like several colleagues in forum, we are to disable fap correctly in MB

aveis
31st January, 2013, 11:28 AM
Is somebody able to take DPF off from EDC16CP31 MB Sprinter 318CDI 184Hp 2008 1037505819 flash file?

rjyves1
29th May, 2017, 10:16 AM
try pss in mp

remzi1984
29th May, 2017, 10:58 AM
test and report
100% tested solution

free no pass

znoki
30th May, 2017, 10:50 AM
test and report
100% tested solution

free no pass

Was the error code table disabled in this solution?