Ford WDS module programming [Sitemap]

dutchguy

17th April, 2011, 09:48 PM

Zapp

1st July, 2011, 02:57 PM

I have a original Ford Wds diagnostic system here, with software version B43.
Everything exept "module programming" works.
Is there a way to bypass or trick the system into thinking it is properly activated?
Any suggestions are appreciated.

thanks.

I have a original Ford Wds diagnostic system here too,

not sure about any workarounds on it tho

Mine is B43 too and Module Programming works. But does anyone know what the updates go upto maybe B47 I Thinks.....also were i can download them would be superpadupa.....

Cheers Big Ears.....And always thanks in advance XxX Phil

219buster

7th July, 2011, 10:34 PM

I have a original Ford Wds diagnostic system here, with software version B43.
Everything exept "module programming" works.
Is there a way to bypass or trick the system into thinking it is properly activated?
Any suggestions are appreciated.

thanks.

Hi i think that the module programming stops working 3 to 6 months after the date of release of disc. You have to uninstall reset date to when software was released install and module programming should be back.

NightDragon

8th July, 2011, 01:51 PM

I also want where if at all possible I can DL ford wds.
Thanks in advanced

Kinsana

14th July, 2011, 11:51 AM

Can any help me with medicine 71863.tml file for IDS v72?
Best regards.

xbobcz

14th July, 2011, 12:14 PM

Can any help me with medicine 71863.tml file for IDS v72?
Best regards.
Here is file for version 72.

Kinsana

15th July, 2011, 03:14 PM

xbobcz

15th July, 2011, 07:55 PM

"Here is file for version 72.
Attached Fileshttp://www.digital-kaos.co.uk/forums/images/styles/digital/attach/zip.gif71863.zip (http://www.digital-kaos.co.uk/forums/attachments/f152/71477d1310642061-ford-wds-module-programming-71863.zip) "

I replace file and try today, not working.
What I do wrong?
Best regards.

Check if exist
c:\Documents and Settings\All Users\Application Data\Ford Motor Company\IDS\Users\_to_flag.exml
and delete it. Restart PC.
If this not help, post original 71863.tml.

Kinsana

15th July, 2011, 08:28 PM

Check if exist
c:\Documents and Settings\All Users\Application Data\Ford Motor Company\IDS\Users\_to_flag.exml
and delete it. Restart PC.
If this not help, post original 71863.tml.

About _to_flag.exml I know, not help me.
This original file:

Best regards.

xbobcz

15th July, 2011, 08:53 PM

About _to_flag.exml I know, not help me.
This original file:

Best regards.

I checked your file and everything is OK. File which I posted should you help.
You still get Section not available when you want enter module programming or other error?
You can run Monitor2k2.exe before starting IDS, then start IDS, try to enter Module Programming,
save log from Monitor2k2, post it here and I can look where is problem.

Kinsana

16th July, 2011, 04:57 AM

I checked your file and everything is OK. File which I posted should you help.
You still get Section not available when you want enter module programming or other error?
You can run Monitor2k2.exe before starting IDS, then start IDS, try to enter Module Programming,
save log from Monitor2k2, post it here and I can look where is problem.

I have "Selection not available"
And thanks for your time for me.
That's log:
Best regards.

xbobcz

16th July, 2011, 06:40 AM

I have "Selection not available"
And thanks for your time for me.
That's log:
Best regards.

I looked into log and there is probably change in v72.
Try this.
First locate c:\Program Files\Ford Motor Company\IDS\Runtime\Apps\mcp.ini
In the file should be line with MCP_VERSION_TIMEOUT=120
Change this to MCP_VERSION_TIMEOUT=1200

Kinsana

16th July, 2011, 07:51 AM

I looked into log and there is probably change in v72.
Try this.
First locate c:\Program Files\Ford Motor Company\IDS\Runtime\Apps\mcp.ini
In the file should be line with MCP_VERSION_TIMEOUT=120
Change this to MCP_VERSION_TIMEOUT=1200

No luck.
I tryed in several variants.
When i time back (after reinstal) all works, replace .tml file give error, back original .tml and all OK.
When is real time in all combination (change in .ini file only, change in .ini file and replace .tml, only replace .tml) give error.

Best regards.

xbobcz

16th July, 2011, 06:50 PM

No luck.
I tryed in several variants.
When i time back (after reinstal) all works, replace .tml file give error, back original .tml and all OK.
When is real time in all combination (change in .ini file only, change in .ini file and replace .tml, only replace .tml) give error.

Best regards.

Today I have downloaded IDS v 72 and looks like that my 71683.tml solve expiry problem. Replace 71683.tml with my patched file and send me new log from Monitor2k2.

Kinsana

17th July, 2011, 05:33 AM

Today I have downloaded IDS v 72 and looks like that my 71683.tml solve expiry problem. Replace 71683.tml with my patched file and send me new log from Monitor2k2.

That's new monitor2K2 log, with change in .ini file.
Best regards.

xbobcz

17th July, 2011, 07:35 AM

That's new monitor2K2 log, with change in .ini file.
Best regards.

Only ini change? Looks like that there is change in 71683.tml, but the file is bad. I attached it again. Try this file.

Kinsana

17th July, 2011, 08:29 AM

Only ini change? Looks like that there is change in 71683.tml, but the file is bad. I attached it again. Try this file.

Yes, now all OK. So previous file was corrupted.
Thanks.
Best regards.

Highvolt

21st July, 2011, 05:01 PM

Here is file for version 72.
I follow the instructions but IDS 72 ask for password

calin_bm

2nd October, 2011, 07:30 AM

I looked into log and there is probably change in v72.
Try this.
First locate c:\Program Files\Ford Motor Company\IDS\Runtime\Apps\mcp.ini
In the file should be line with MCP_VERSION_TIMEOUT=120
Change this to MCP_VERSION_TIMEOUT=1200
After many many pages that i have read along this forums,i see that i must protect the software,because somehow i will lost module programming.So,i search and find both one files- MCP.ini and the 71863.tml.I only edited mcp.ini file,is it enough on
ids v72?
Thank you for your time.

xbobcz

2nd October, 2011, 08:05 AM

After many many pages that i have read along this forums,i see that i must protect the software,because somehow i will lost module programming.So,i search and find both one files- MCP.ini and the 71863.tml.I only edited mcp.ini file,is it enough on
ids v72?
Thank you for your time.
For version 72 it is necessary change 71863.tml. Use my patched file from my post #16 in this thread.

AvechuchoAxel

5th December, 2011, 07:55 PM

Where can I D/L the latest working version and fix of IDS for clones?

Also... I have original WDS GNA3500 (B43 / A6 / C5) , my docking station seems to stop working, because when I dock the unit doesnt power up or communicate with PTU. PTU start and load software with code 1028 and 402 ( what those codes mean?). After loading, the RED padlock on the right bottom remind me that the unit only work as oscilloscope and multimeter. I can access WIN98 if I attach a keyboard to PTU. I have also this code after finishing loading software... : TESTMAN 12 56 160115 ANYONE KNOWS WHAT IT IS?

Thanks