immo off peugeot J34p :)

[benci1982]

hi. When someone may need immo off dump for valeo J34P ecu, here is the dump

pass to PM

[Zmann]

Hi benci, do you know that if this dump can be used with other variant of S2000 with 95160

[benci1982]

hi. I dont know. but if the login stored in lines: 0x000 to 0x0E0 then yes!

[supersamy]

;) Here to find the 95160 ;)


66749


:top: Tested thank's work perfectly :top:

[ali774]

schematic valeo j34p
ECU VALEO J34P-MOTOR TU3A-206
http://up.iranblog.com/images/urty5knapnvqfdluwt.pdf

[mastaflex]

who have tried this file ?

[cfgebel]

this file does not work i try it

[stevan]

Please i need help,i have 206+ (T3E) 1.4i 75 (TU3A) with damaged ECU.
Customer buy used ECU and i have clone eprom.
In his ECU was 25L160 in used he buy is 95160.
Car not start,so i put back original and virgin to BSI to configure BSI to used ECU and pin code.
But when i put ECU ,radiator fan was working now.
Can something be damaged in ST10F273 software or what?
Does someone have ECU wiring,this wiring on link above i can't understand nothing.
In ECU i have only one error,Power relay control and in BSI,no communication with engine ecu.

Is it possible immo off or some virgin file for this ECU?
Here are pictures of ecu.
On my not write Valeo like on above in post,on other side write on metal Johnson Control.
PS: Damaged ecu i have clear so have picture of all components inside.

[benci1982]

Hi. the pass is:
benci1982@10@30

work 100%!!!!

[benci1982]

Please i need help,i have 206+ (T3E) 1.4i 75 (TU3A) with damaged ECU.
Customer buy used ECU and i have clone eprom.
In his ECU was 25L160 in used he buy is 95160.
Car not start,so i put back original and virgin to BSI to configure BSI to used ECU and pin code.
But when i put ECU ,radiator fan was working now.
Can something be damaged in ST10F273 software or what?
Does someone have ECU wiring,this wiring on link above i can't understand nothing.
In ECU i have only one error,Power relay control and in BSI,no communication with engine ecu.

Is it possible immo off or some virgin file for this ECU?
Here are pictures of ecu.
On my not write Valeo like on above in post,on other side write on metal Johnson Control.
PS: Damaged ecu i have clear so have picture of all components inside.

hi. try changing the BSM (fuse box engine bay)
post original dumps!!!

[stevan]

Here dump's,it is silly that i have no communication between BSI and ECU even after i have connect wires directly.
On original and used ecu CAN ressist is 120R so it shuld be ok.
Only if this ECU have CAN pin on other place.As you can see on original write Valeo,on used JCAE (Johnson Control)

[stevan]

Benci 100x tanks,car start.
But because of missing CAN communication i can't telecode ECU right and Dashboard and other CAN based device not work.
Definitely Johnson control and Valeo ecu are not compatible.

[benci1982]

hi. new method for immo off. just as red is written,i must rewrite the org dumps. no telecodate. work, tested

[nikinik]

thanks for the file benci,but do i need cut any wire when use this file.or make some write protect like some another cars?

[benci1982]

no need cut wires. i used write protect, but it goes without (when use write protect use this, status register= 8C -->this is complett write protect)

[forema]

worcet 100% 206 peugeot

[benci1982]

worcet 100% 206 peugeot

hi. this dump is in post 1!!!!!!!!!!!!!!!!

we first read, then I Write here. ok???? and this dump is MY DUMP.

[dj_chrif]

works 100% friends

[omglol]

hi. new method for immo off. just as red is written,i must rewrite the org dumps. no telecodate. work, tested

I can confirm this method works, tested on Citroen C2 1.4 VTR.

Dump from post #1 starts, but there was fault in ECU I could not delete, but the "new method" works 100% OK!

[Zmann]

hi benci, if all write protect, i understand that the new dynamic parameter keeps writing to the eep. so by this mod, you found any abnormal running? my two cents

no need cut wires. i used write protect, but it goes without (when use write protect use this, status register= 8C -->this is complett write protect)

[atomiczen]

someone can help me on j34p with different micro?
st10f273 and st10f275 both found on j34p-aae
http://www.digital-kaos.co.uk/forums/f175/peugeot-206-valeo-j34p-aae-clone-problem-268641/

[atomiczen]

someone can help me on j34p with different micro?
st10f273 and st10f275 both found on j34p-aae
http://www.digital-kaos.co.uk/forums/f175/peugeot-206-valeo-j34p-aae-clone-problem-268641/
problem solved, if you need here the thread
http://www.digital-kaos.co.uk/forums/f175/peugeot-206-valeo-j34p-aae-clone-problem-268641/ (http://www.digital-kaos.co.uk/forums/f175/peugeot-206-valeo-j34p-aae-clone-problem-268641/)

[Turbo5GT]

hi. new method for immo off. just as red is written,i must rewrite the org dumps. no telecodate. work, tested

This worked for me 100% on Citroen C2 1.4 8v:)

[gsmpuky]

Hi
i need immo off C3 1.4 54kw 2008

Thanks ;)

[mananjohughie]

hi. I've got a peugeot 206 valeo J34P-AAE with accelerator's problem. so I changed the accelerator but remain the same, i couldn't accelerate.
I found an ecu JCAE J34P-AAE, I swap eeprom and car start with acceleration. the dashboard works well.

[houcem80]

hi to all

is there sollution for v34??

best regards

[czaderx]

anyone tested this dump with peugeot 207? 2008. i try and non start.

[x-tech]

please pass

[DUSTYDUSTER]

hi. new method for immo off. just as red is written,i must rewrite the org dumps. no telecodate. work, tested
work 100% , good job my friend .

[Raffy haddad]

thanks benci1982 it worked 100%
regards