Please help with vw8 3c0909605m [Sitemap]

elephantul

21st April, 2011, 08:23 PM

Please help my with crash on vw8 trw 3c0909605m unit. i clear crash but error ,,control module'' persist on diagnose. Thanks

jjrp255630

22nd April, 2011, 12:47 AM

Please help my with crash on vw8 trw 3c0909605m unit. i clear crash but error ,,control module'' persist on diagnose. Thanks
put crash dump back in ecu, conect it in car, start car, then stop car, disconect batery, remove airbag ecu, clear dump, put ecu back in car, wait 5 minutes, conect batery, clear dtcs and it will work.

emanuel2010

22nd April, 2011, 05:27 AM

hi.try with this file.

elephantul

22nd April, 2011, 06:02 PM

thanks , but jjrp255630 (http://www.digital-kaos.co.uk/forums/members/57276-jjrp255630/) methode don't work

credoline

26th April, 2011, 02:00 PM

Try and report back.

elephantul

28th April, 2011, 05:57 PM

Thanks, i report tomorow

elephantul

29th April, 2011, 08:08 PM

Works ok , thanks very much :beer:

vanya86

8th July, 2011, 06:24 PM

I have same problem, no communication after clear.
I will be happy if you send me pass. Thank you

ROBERTby2000

28th June, 2013, 09:11 PM

Please help my with crash on vw8 trw 3c0909605m unit. i clear crash but error ,,control module'' persist on diagnose. Thanks

elephantul

29th June, 2013, 07:38 AM

clear done .....

ROBERTby2000

30th June, 2013, 09:12 AM

@elephantul, thank`s but it`s not ok. "Control module defective" again.

enrikass

24th October, 2013, 08:19 PM

226349226349

DottoreBL

26th October, 2013, 08:45 AM

Can i get pas please ?

DottoreBL

26th October, 2013, 08:46 AM

Try and report back.

can i get pass please ?

kkrase

28th April, 2014, 11:50 AM

can i get pass please

kkrase

9th May, 2014, 01:45 PM

Please help my with crash on vw8 3C0 909 605M :blue:259298

simosamrani

27th July, 2014, 03:42 AM

thanks very much

cristecristian

24th February, 2018, 09:56 AM

Please help my with crash on vw8 trw 3c0909605m unit. i clear crash with carprog but error control module persist . Thanks

badziewo

25th February, 2018, 01:08 AM

Here you go.

rmvl

25th February, 2018, 06:58 AM

Try and report back.
hello credoline I have a problem with the VW 8 airbag block 3CO909605M help me with a dump on this block error 00003

auto80

25th February, 2018, 07:22 PM

hello credoline I have a problem with the VW 8 airbag block 3CO909605M help me with a dump on this block error 00003

post your file here m8, for someone help you

Cheers

szkeptmen

25th February, 2018, 10:53 PM

Strange VW8R airbag ecu
Got a VW8 module - VCDS can't erase crash data... (!)
Error code 00003 - internal memory error.
I think Carprog will do the job - but can't erase too... :(

Someone can help me with a tested solution, please ?

1K0 909 605 P

SME 5WK4 3700
AIRBAG VW8R

02 H032 S6800

Thanks + Rep, of course.

auto80

25th February, 2018, 11:25 PM

Strange VW8R airbag ecu

Got a VW8 module - VCDS can't erase crash data... (!)
Error code 00003 - internal memory error.
I think Carprog will do the job - but can't erase too... :(

Someone can help me with a tested solution, please ?

1K0 909 605 P

SME 5WK4 3700
AIRBAG VW8R

02 H032 S6800

Thanks + Rep, of course.

tested here

Cheers :)

szkeptmen

26th February, 2018, 11:06 PM

The less is more...
THX

keymanbg

22nd July, 2019, 12:10 PM

Try and report back.

need pass too.. thanks

leotdx

28th May, 2020, 04:40 PM

Please help. I tryed to remove with carprog and i get control module defective. This is original file

wembleyhill

28th May, 2020, 04:47 PM

your file clear

leotdx

28th May, 2020, 04:51 PM

Thank you wembleyhill but i get the same error. CONTROL MODULE DEFECTIVE. Can somebody else help?

jokir

28th May, 2020, 06:20 PM

Try and report

leotdx

28th May, 2020, 08:28 PM

Not good. The problem for module defective is checksumm. Carprog solution is good but is not calculating checksumm.