VW Transporter 2010 /2011

[TULGEYWOODMAN]

T5 with 24c64
Has anyone done one of these with DP3?
obd2.................

[markony79]

Its the same like Golf6

[smartymarti]

I tried 2011 with dp3 didn't go, saying that the 2009- q7 didn't go with it either

[james44000]

I did it with smelecom vag prog and it's ok so it will be ok for you

[markony79]

Try with this

[TULGEYWOODMAN]

Try with this

this pdf is for 24c32 is it not?

Trying to establish has anyone done a 2010/11 T% WITH 24c64 with dp3 ?
the only option with the dp3 is obd2

there is no option to read key or prepare eeprom with the 24c64.

[TULGEYWOODMAN]

I did it with smelecom vag prog and it's ok so it will be ok for you

Did you do the 24c64 version with vagdashprog?

[pinkfloyd5eg]

T5 with 24c64
Has anyone done one of these with DP3?
obd2.................
you may try this!
have a look at the attached pic.

[autofan1965]

you may try this!
have a look at the attached pic.

Where You have find in menu NEC 24C64?!

[TULGEYWOODMAN]

you may try this!
have a look at the attached pic.


this is a T5 2011 with 24c640 were talking about

[pinkfloyd5eg]

Where You have find in menu NEC 24C64?!
if it is the same as Golf6 as mentioned on a previous post here ,then it would be supported on the menu cause Golf6 is supported, but Golf6 has 24c32 not 24c64 so am not sure if it is like Golf6 or not !!
I didn't try it on vw transporter ,we havn't that car in our market at all.
sorry if I made you confused.

[pinkfloyd5eg]

this is a T5 2011 with 24c640 were talking about
if you aleady have DPIII then this car would be covered on the 29/3/2011 update
"29.03.2011
Software for change odometer in VW/SEAT/SKODA VDO UDS D70F3426 + 24C64 - programming milage fully via OBDII"

[z786]

i think you have selected mm7 as in 912 in dash, completely different technology

shouldnt play with things you not sure about

[TULGEYWOODMAN]

if you aleady have DPIII then this car would be covered on the 29/3/2011 update
"29.03.2011
Software for change odometer in VW/SEAT/SKODA VDO UDS D70F3426 + 24C64 - programming milage fully via OBDII"

I know that .......................and it doesnt work on this one

"security access error"

That is why I ask the question !

[TULGEYWOODMAN]

i think you have selected mm7 as in 912 in dash, completely different technology

shouldnt play with things you not sure about


What?

you are making joke?

[autofan1965]

if it is the same as Golf6 as mentioned on a previous post here ,then it would be supported on the menu cause Golf6 is supported, but Golf6 has 24c32 not 24c64 so am not sure if it is like Golf6 or not !!
I didn't try it on vw transporter ,we havn't that car in our market at all.
sorry if I made you confused.

VAG dashes till model 2010 when with NEC then 24C32, from model 2011 24C64.

[TULGEYWOODMAN]

So, one more time.

Has anyone tried to do 2011 T5 with latest DP3 update 24c64 via obd2?

[z786]

What?

you are making joke?

i are not making jokes, i is serious, unless you can correct me mate

[TULGEYWOODMAN]

i think you have selected mm7 as in 912 in dash, completely different technology

shouldnt play with things you not sure about


sorry, for a minute I thought you where suggesting I didnt know which menu to select.

[z786]

lol i figured

[TULGEYWOODMAN]

mind you, it does confuse me, Enigma, DP3, vagdashprog,lots of menus to look at!

[pinkfloyd5eg]

VAG dashes till model 2010 when with NEC then 24C32, from model 2011 24C64.

can someone show me what is the different between 24c32 and 24c64 ,and my friend "z789" I know that menu selection would be for Magneti Mareli while in our case is VDO instrument ,just wanted to show on the menu the NEC 24c32 where golf6 is included and many other nec 24c32 vw dashes, don worry, am not playing with things not sure about, but thanx for the advice as usual , now please what is the different between those 2 EEPROMs ??

[TULGEYWOODMAN]

its not the difference between the eeproms [size] thats important here, its the data !

[pinkfloyd5eg]

its not the difference between the eeproms [size] thats important here, its the data !
did u try to read that car with nec 24c32 selection , couldn't it read at all or it showed wrong Km ?? I mean may be they didn't change the algorithm or may be they used an algorithm of any other vw dash with nec + 24cxx ??
am only asking, I don't have exact info about this car !!
tanx...

[TULGEYWOODMAN]

did u try to read that car with nec 24c32 selection , couldn't it read at all or it showed wrong Km ?? I mean may be they didn't change the algorithm or may be they used an algorithm of any other vw dash with nec + 24cxx ??
am only asking, I don't have exact info about this car !!
tanx...

It is much more complex than that. If only it was a case of a mileage address and algo life would be oh so simple.
thanks anyway

[pinkfloyd5eg]

It is much more complex than that. If only it was a case of a mileage address and algo life would be oh so simple.
thanks anyway
would be simple via obd then ,no way !

[autofan1965]

did u try to read that car with nec 24c32 selection , couldn't it read at all or it showed wrong Km ?? I mean may be they didn't change the algorithm or may be they used an algorithm of any other vw dash with nec + 24cxx ??
am only asking, I don't have exact info about this car !!
tanx...

It is complete another story! Nice that You give advices, but I think You have 0 knowledge about this dashes! Maybe You try 24C32 procedure on Your post dash... VAG is really advanced in security this units because there in most cars is immo too. I am littel bored to read answer on all Micronas and NEC problems to try best from best chinese CDC tool. Question from TULGEYWOODMAN is: Can DP3 really 24C64 from T5!

[pinkfloyd5eg]

It is complete another story! Nice that You give advices, but I think You have 0 knowledge about this dashes! Maybe You try 24C32 procedure on Your post dash... VAG is really advanced in security this units because there in most cars is immo too. I am littel bored to read answer on all Micronas and NEC problems to try best from best chinese CDC tool. Question from TULGEYWOODMAN is: Can DP3 really 24C64 from T5!
wow zero is too much for me m8 ,am (-100) maybe,
first time to know that immo is on the cluster or kessy ,thanks for this strong info :roflmao:

[T72]

It is complete another story! Nice that You give advices, but I think You have 0 knowledge about this dashes! Maybe You try 24C32 procedure on Your post dash... VAG is really advanced in security this units because there in most cars is immo too. I am littel bored to read answer on all Micronas and NEC problems to try best from best chinese CDC tool. Question from TULGEYWOODMAN is: Can DP3 really 24C64 from T5!

I have did Tiguan with 24c64 with no problems, but I am not sure about all versions! T5 will be the same, but do not know how many versions there are, cars to new! Elprosys are good in OBD softs!

[TULGEYWOODMAN]

I have did Tiguan with 24c64 with no problems, but I am not sure about all versions! T5 will be the same, but do not know how many versions there are, cars to new! Elprosys are good in OBD softs!

well I must have an odd one!

[pinkfloyd5eg]

Can ROSFAR (Original) work for those new dashes ?? can anyone please post the last updated supported vehicles list ,or the link to the main supplier plz ??

[markony79]

Can ROSFAR (Original) work for those new dashes ?? can anyone please post the last updated supported vehicles list ,or the link to the main supplier plz ??

Rosfar is closed more then 2 years,
how can make the new update for new model of car
when dont exist anymore????

[pinkfloyd5eg]

Rosfar is closed more then 2 years,
how can make the new update for new model of car
when dont exist anymore????

actually ,didn't know about the original one, but i had CAS3 chinese clone working with rosfar software for mercedes and BMW only and they sent me updates 2 times, so I thought the original product would be there till now ,since last update i got was 9 months ago !

[frontpager]

Tulgeywood do you have a Miles dump for this ?
Tying to figure out km>miles conversion on one.

Thanks
Pager

[TULGEYWOODMAN]

cant remember!
I will have a look

[frontpager]

If you could please.
Thanks a lot.

[TULGEYWOODMAN]

Kms or miles?

oops, mls , let me look again.