View Full Version : Kia airbag made by Mobis - need pinout !
szkeptmen
25th April, 2011, 12:47 PM
Hi,
Can somebody help me with a connector's pinout ?
KIA AIRBAG CONTROL UNIT
MOBIS 0 K30E 67 7F0
Part No: G13018
Yellow connector, 30 pins.
Pin 6 is the GND, need +12V, lamp, driver airbag, and two
pretensioners pins...
Thanks in advance, szkeptmen
johnnts200
26th April, 2011, 09:21 AM
Hi,
Can somebody help me with a connector's pinout ?
KIA AIRBAG CONTROL UNIT
MOBIS 0 K30E 67 7F0
Part No: G13018
Yellow connector, 30 pins.
Pin 6 is the GND, need +12V, lamp, driver airbag, and two
pretensioners pins...
Thanks in advance, szkeptmen
what model and year?
johnnts200
26th April, 2011, 09:37 AM
likely is from kia rio 2003 yr
pin 5 is the +12v
pin 7 is the warning lamp (instr.cluster)
pin 9 is diagnostic line
pins 10-11 are driver a/b
pins 13-14 are passenger a/b
1-2 left pretensioner
3-4 right pretensioner
if different model and year tell me ........
regards
szkeptmen
26th April, 2011, 08:15 PM
Yes, this is a Rio, year 2003 :)
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.