renault megan 2009 dci

[andersonmaxi]

hello guys i need ur help
i want change miliage of this car renault megan 2009 dci
wish eprom can i find in ths dash of this car
thx u for ur help

[smartymarti]

I'm sure it's 24c16 In dash and 95128 in pump although you can use can blocker

[andersonmaxi]

how can use blocker
pls tell me moor for this car
thx u

[javilette]

in this link you can see the can filter for the dash if you want put the can filter you have to remove the abs and edit the eprom in abs too
Mercedes / Renault Universal CAN Filter - Mileage Correction Software Tool - Smelecom UK - Mileage Correction Software Tool (http://www.smelecomuk.co.uk/epages/Smelecom.sf/es_ES/?ObjectPath=/Shops/Smelecom/Products/12478)

[andersonmaxi]

so i change miliage just in the dash ????

[centrohifi]

miliage..in ABS ECU !! javilette ..tested Can Bus Filter in Megan 3 ? work well ? :)

[andersonmaxi]

and what abt dash 24c16 ???

[smartymarti]

Post dump I'll do it for you

[andersonmaxi]

hello guys
i find in the dash of this car megan berer 2009 eprom 24c16 and the value of the miliage is 70000 km
i need 25471 km
thx u for ur help

[andersonmaxi]

hello smartymarti
i post dump of the dash 24c16 ther pls i need ur help
thx u

[smartymarti]

mileage shows 97664 on dp3 and enigma enclosed 25500km

[andersonmaxi]

are u change value of the miliage smartymarti ?
pls i dont find the abs in this car
so if i write with ur dump the miliage change ??
thx u for ur help

[smartymarti]

Mileage is changed but you need to do either abs pump or fit a can blocker otherwise mileage will jump straight back

[ALEXEI]

are u change value of the miliage smartymarti ?
pls i dont find the abs in this car
so if i write with ur dump the miliage change ??
thx u for ur help

not easy job amigo to get abs out but there is 2 ways to get it is with pump deariation and without.


Alex

[smartymarti]

It's easier to fit blocker

[Digamax]

It's easier to fit blocker
Yes, but in my country i can charge for this car max about 100 euro, so I must forget can blocker.

Best regards
Vladimir

[andersonmaxi]

so if i w ant change miliage of this car its important to change file eprom 95160 in the abs ???
ok i send u the file dump of the abs

[andersonmaxi]

i send u the dump of abs
pls
the miliage work good if i send u the file dump of the abs ????????

[smartymarti]

yes it will work no problems

[TULGEYWOODMAN]

Yes, but in my country i can charge for this car max about 100 euro, so I must forget can blocker.

Best regards
Vladimir
yes but in your country the car is same price as any other country ....yes or no?

so if too many kms on clock, same applies in any country !

or you can spend all day removing and refitting ABS pump !

[Digamax]

yes but in your country the car is same price as any other country ....yes or no?

so if too many kms on clock, same applies in any country !

or you can spend all day removing and refitting ABS pump !
You are right, but you must live in my country to understand this. My friend who is car mechanical remove to me ABS and refit after correction for 30 euro, and hi is very happy. In my country people work all mounts for 200 euro.
I work this job about 7 years, and spend about 30000 euro on equipment, but guys with TU, for 400 euro ruins this job. They work for example Fiat Punto - 10 euro, Peugeot 206 (dash+BSI) - 20 euro...
My town is small, about 50000 residents, and in him there are about 10 TU, 3 AVDI Abritus Original, 2 DP3, Enigma...
So, I am not alone with good machine and big experience. If I refuse job other will accept.

Best regards
Vladimir

[TULGEYWOODMAN]

I also have undercutters, but i wont join them................How many of your competitors can do the Renault.?
The enigma and dp3 owners surely could not work for peanuts, the machines where not free!

the TU guys can only do old cars, correct?
so are you saying the undercutters are the guys with the enigma and dp3?

[Digamax]

I also have undercutters, but i wont join them................How many of your competitors can do the Renault.?
The enigma and dp3 owners surely could not work for peanuts, the machines where not free!

the TU guys can only do old cars, correct?
so are you saying the undercutters are the guys with the enigma and dp3?
Yes, guys with DP3 and AVDI charge Passat 2007, dash + ECU, 35 euro, C4 Picasso 40 euro, all dash with eeprom 15 euro. I think that is enough for you. I can accept that or to close my garage. I am really disappointed about that but this is life.

Best regards
Vladimir

[TULGEYWOODMAN]

Yes, guys with DP3 and AVDI charge Passat 2007, dash + ECU, 35 euro, C4 Picasso 40 euro, all dash with eeprom 15 euro. I think that is enough for you. I can accept that or to close my garage. I am really disappointed about that but this is life.

Best regards
Vladimir

they must get good price on updates then!

[andersonmaxi]

hello guys
i find eprom in the ABS 95160 i read
and there is the file
pls i need ur help guys
thx u for ur help

[andersonmaxi]

pls help me i need 38475 km pls i send last time dump of dash the original value of he dash is i think 97857 i think thx u

[obdmaster]

pls help me i need 38475 km pls i send last time dump of dash the original value of he dash is i think 97857 i think thx u


Enclosed is 35000km and 40,000km


Your original dump is 97817km :top:

[andersonmaxi]

ok thx u and what abt the file dump of the ABS

[obdmaster]

ok thx u and what abt the file dump of the ABS


My dumps are of the ABS m8,:top:

[andersonmaxi]

ok and what abt the dash

[andersonmaxi]

WHAT ABT THE DASH OBDMASTER??????

[obdmaster]

WHAT ABT THE DASH OBDMASTER??????


Your ABS is done by abrites m8, the dash using abrites i would do by obd.

So best to get someone else for dash dump m8.

[smartymarti]

your dash has been done by myself and the abs by obd master you have everything you need to finish the job

[andersonmaxi]

thx u all friend its solved
thx u for ur help

[drpeter]

Enclosed is 35000km and 40,000km


Your original dump is 97817km :top:

Ramzai would say 97816km lol.... by the way I only have TU

[blackpirate]

Ramzai would say 97816km lol.... by the way I only have TU
thnx Doc!

where is Ramzai!?????

didnt saw him recently!

[drpeter]

thnx Doc!

where is Ramzai!?????

didnt saw him recently!

I don't know, I think he was so smart that he forgot what this forum is meant for, helping other members.

[markony79]

DrPeter,
I didnt understand why you make scrypt for upa
when allready exist calculator for all tipe of car,and more
modules then the TU can do it, or another china tool
be reality

Its time to buy some good tools
and then you will not share calcul or lose time
make something when allready exist

Reg?rds
Milan

[drpeter]

DrPeter,
I didnt understand why you make scrypt for upa
when allready exist calculator for all tipe of car,and more
modules then the TU can do it, or another china tool
be reality

Its time to buy some good tools
and then you will not share calcul or lose time
make something when allready exist

Reg?rds
Milan

Good tools? Have you tried to adjust ABS with dp3 or smelecom? It doesn't work. Besides that I like to make scripts and really good tools like enigma cost 12000 euro. I don't like spending a lot when most cars are easy to calculate by yourself. I even gave solutions in the past to company's who sell them now to you.

3 years after TU I still can do most of the new cars without spending a lot. The only tool I bought is vagprog because most vag cars goes by obd. I don't have time and knowledge to do that also.

Sorry I am not a button pusher. I rather know what I am doing if something doesn't work or isn't in my menu. It's amazing what you can do yourself, when it becomes really difficult I get help from the Philippines :-).

[T72]

Good tools? Have you tried to adjust ABS with dp3 or smelecom? It doesn't work. Besides that I like to make scripts and really good tools like enigma cost 12000 euro. I don't like spending a lot when most cars are easy to calculate by yourself. I even gave solutions in the past to company's who sell them now to you.

3 years after TU I still can do most of the new cars without spending a lot. The only tool I bought is vagprog because most vag cars goes by obd. I don't have time and knowledge to do that also.

Sorry I am not a button pusher. I rather know what I am doing if something doesn't work or isn't in my menu. It's amazing what you can do yourself, when it becomes really difficult I get help from the Philippines :-).

in 90% you are right! Long time I think like you, why I must pay a lot money for tool makers, **** them...! But if you want to be very quick in this job, and be able to make all cars(more than other guys can), must spend 30k euros for 10% cars what cant be done by you... :pepsi:
Any way, RESPECT!

[markony79]

OK
I was just curious
I just ask you realy questions?

in this forum sometimes is not good to ask what you think?

and if I know the TU is clone from 2007 original DIGA CONSULT
can you imagine what DIGA CONSULT can do now after 5 years?

[T72]

OK
I was just curious
I just ask you realy questions?

in this forum sometimes is not good to ask what you think?

and if I know the TU is clone from 2007 original DIGA CONSULT
can you imagine what DIGA CONSULT can do now after 5 years?
TU its largest disaster in our bisnes :(

[markony79]

TU its largest disaster in our bisnes :(

For me is not matter what can do TU,
but the people who use this in my town and little longes from me
I charge them dublle when can not do something or damage something