PDA

View Full Version : Vito DPF OFF


mati-rk
28th April, 2011, 05:04 PM
Hi all on DK!
Please help me with DPF OFF on Mercedes Vito 115CDI. I done it with ecusafe, car started ok gone 400km and then no fault code is shown but I can accelerate only to 3000 rpm. I started again and car goes fine, but every 400 km the same fault. Anyone help? Here is my dump
mercis
28th April, 2011, 05:38 PM
i think,your dpf is full
mati-rk
28th April, 2011, 07:32 PM
no it isn?t because i removed dpf and KTS says me 10 percent pollution
tuningschool
28th April, 2011, 08:47 PM
is very difficult to delete dpf on mercedes vito ... ;)
mati-rk
28th April, 2011, 10:55 PM
any idea how to do this job?
mati-rk
9th July, 2011, 10:11 AM
Hi all. My problem with Vito is back. Customer done some about 15000 km and car is now in limp mode only 3000 rpm. Fault memory is clean DPF pollution is 0 percent and check engine light is off. What can I do with this? Another Vito whitch I have done with Ecusafe is OK. I don?t know what?s wrong. Help please. Maybe differential pressure sensor problem?
andreic
6th September, 2011, 10:22 AM
Hello,
I also have a Vito with this problem, DPF off made with ecusafe. Did you manage to solve it?
mati-rk
6th September, 2011, 09:54 PM
Hello,
I also have a Vito with this problem, DPF off made with ecusafe. Did you manage to solve it?

Yes I solved it. DPF OFF with ecusafe was good. The problem was differential pressure sensor. I fitted new sensor, reflash ECU with ecusafe file and everything is ok. Car after this have driven 35000km till now and still everything is ok.