pin code opel astra h

[aliali18]

How can be calculated pin code opel astra h

[aliali18]

???????????????????

[super jumbe]

Astra H pin is located in instrument dash panel in eeprom M35080.

[aliali18]

Astra H pin is located in instrument dash panel in eeprom M35080.



How to Open dash opel astra h ???

[dam495]

How can be calculated pin code opel astra h

read the dump of immo and post here, maybe can i help you.

[aliali18]

read the dump of immo and post here, maybe can i help you.


I don't know how to open the Dashboard To read eeprom !!!

[super jumbe]

Quiet easy, just pull the steering adjuster down and pull the steering wheel up you will see two screws at the bottom of the dash, you remove two screws the dash will come out. You will have to strip the dash to get to the M35080 chip, and then you unsolder and read the bin file and let us sort you out.
If you do not want all that hassle, just go to dealer and they will give you the pin for about ?30.00 in UK.

[aquer]

How can be calculated pin code opel astra h
Hi,
Pin code is Dash (M35080), REC (95040), UEC (95080), CIM (hc 908 mask 0L72A), Display (93cXX), UCH (95640 or 24c32), SDM , ECU ....
Everywhere is the same pin.
Your best bet is to pull the UCH (radio)
http://www.digital-kaos.co.uk/forums/f176/oscr-opel-security-code-reader-cd30-cd30mp3-175479/#post866563

Good luck :)
Regards.

[Diodakus]

Hi
Please read PIN from ECU EDC16C file eeprom.

Bosch EDC16 0 281 011 943
Opel Astra H 1,7 CDTI
THX :bounce:

[richard27]

Hi
Please read PIN from ECU EDC16C file eeprom.

Bosch EDC16 0 281 011 943
Opel Astra H 1,7 CDTI
THX :bounce:

2704 try friend

[messhi78]

thanks with this soft for opel im test and post resultat
good job

[wrbelasco]

HI, richard 27 can you send me the soft for Astra H?

[aquer]

HI, richard 27 can you send me the soft for Astra H?

Hi,
Code is public!!!
Code can be read on the radio, here: http://www.digital-kaos.co.uk/forums/f176/oscr-opel-security-code-reader-cd30-cd30mp3-175479/#post866563
Regards

[pedjica]

please need code from uec module.

[Johnner]

Well,post the file then ? :dontknow:

[Bllinda]

.... .... 5513

please need code from uec module.

[Hunger2009]

Hello! Can I get some help with the car pass for an Astra H 1.9DTH? I have attached the ECU dump read with MPPS.

Thanks in advance! :)

[Bllinda]

You need to read the note,spi

[Hunger2009]

You need to read the note,spi
Thank you for your response! But what is spi? Can't the car pass be read from the eeprom dump I provided from MPPS?

Thanks!

[Hunger2009]

I have attached the full raw data from MPPS (before this I attached the bin file). Can this be done using this dump? Thanks!

[Bllinda]

SPI is a 95xxx
ee.prom

You need to read the note,spi

[frange]

SPI is a 95xxx
ee.prom

Hi, sorry.
One question, how can i read M 35080 from dash of astra h?
The pickit2 can it read?
Thanks

Enviado desde mi ALE-L21 mediante Tapatalk

[mctr]

Astra H pin is located in instrument dash panel in eeprom M35080.
hello,
can anyone help me with PIN code by dump VDO eeprom 35080? auto astra h 2007.
than in advance!496832

[mctr]

thanks in advance...

[clusters]

.............0528

[mctr]

thank you verry much!

[mctr]

please help in next problem...
with my carprog clone reworked i have read and modify dump in the original eeprom 35080_6 from the dash. i bought new 35080_6, i can read it (dump=00 00 ..), but i can not write on it(i've tried to copy the original dump on new eeprom, i've tried to modify some random locations from 00 to others values) - carpog try writting, but on the end of verify return an error message and the dump still unmodified 00, 00.... i can't even erase this new eeprom(dump to FF FF ...) - carprog try erase, no error message, but dump still 00,00 ... not FF FF ... i've tried with 2 new eeproms, same problem on both...
is there some trick??? i don't understand why on original chip can make any modify(read, eraase, write) and on a new one can't write or erase.
thanks in advance!

[kiszka]

...........

[rrr86]

Kiszka have right, carprog isn't proper tool to work with this memory.

[mctr]

Hy,
Thanks for replys, but i can write/erase the original 35080_6( that one on the dash). I've made this a few times. But i can't write or erase the new ones, same model 35080_6(not V6 pe vp). Maybe bad product? I've tried with 2 new pieces.
The new 35080_6 must be "initialized" or something like that at first use?

[brend]

Hy,
Thanks for replys, but i can write/erase the original 35080_6( that one on the dash). I've made this a few times. But i can't write or erase the new ones, same model 35080_6(not V6 pe vp). Maybe bad product? I've tried with 2 new pieces.
The new 35080_6 must be "initialized" or something like that at first use?

Simpel sulution only for 35080 ,35808-3,35080-6 can rewrite witout erase.

Other like 35080V,35080VP,35080V6, D80D0WQ need spetsial high eraser programmer.

http://www.digital-kaos.co.uk/forums/showthread.php/179874-35080-EPROM-names

[mctr]

thanks! mistery solved. eeprom is 95080. no problem read/write on it...

[brend]

thanks! mistery solved. eeprom is 95080. no problem read/write on it...

China product?

[mctr]

i bought it from a local vendor. he said that is no chinese product, is very good quality... about 6 euro / piece.

does anyone know if i can replace the 35080 on the bord with this "chineseeee" 95080?

[SukiOPC]

i have display safe warning on OPC Zafira A 2002 with CID after i get new NCDR1100 with code.
but it newer asked me for code, first sayed RADIO SAFE and after that switched to DISPLAY SAFE.
Ofcourse i dont have pass card and closest Opel dealer is 200km away and they want me come personally.

Since OPcom 1.39 with 100219a read only corsa,meriva and i think one more model pin code from instrument...
my best bet if someone can read pin for me from engine ECU full 512k readout with MPPS or from instrument cluster EEPROM readout with Opcom.

both readout in file below...or if someone have some other suggestion i will be thankful.

[kiszka]

...........

[RZV1394]

I have the EEPROM file from my opel astra H 1.7cdti, extracted with the MPPS V16 can somebody extract the security code from it ? Thank you in advance !!!577548

[AndreiBBF]

Hello! Can anyone help me with the pin code from this display?
Siemens VDO GM 13178570 (Astra H display)

[rafal]

6917.........................

[AndreiBBF]

Thanks Rafal!
And from this one?

[rafal]

try 9899.................

[AndreiBBF]

Hi! the first pin was ok...

[AndreiBBF]

Hi! the first pin was ok, probably the second too. i want dump unregistred for this display to link it with the headunit.
can anyone help me?

[rafal]

No......is other way
You need uregister headunit then pair with pin from display

[AndreiBBF]

in the end I changed the motherboards between them. the old lcd was broken.
Thanks a lot for help, Rafal!
in the end I changed the motherboards between them. the old lcd was broken

[edgai2]

hi, can someone help me get pin from REC 95040 dump astra h

[lukasz12345]

hi, can someone help me get pin from REC 95040 dump astra h

Read the wrong file again

[edgai2]

Oh thats why I couldn't get pin from online calculator.Read it again and all good. Thanks lukasz12345

[tuningschool]

but is possible for anyone know CODE just from vin?
regards

[kamext]

Witam.
Odczytałem REC 95040 - kalkulator wyliczył mi PIN 3264 - niestety auto nie pobiera pinu.
Czy może ktoś sprawdzić poprawność mojego wyliczenia?

[brend]

Witam.
Odczytałem REC 95040 - kalkulator wyliczył mi PIN 3264 - niestety auto nie pobiera pinu.
Czy może ktoś sprawdzić poprawność mojego wyliczenia?

Dump not ok.
Read better and 16bit.

[Bllinda]

What is the block part number?


Witam.
Odczytałem REC 95040 - kalkulator wyliczył mi PIN 3264 - niestety auto nie pobiera pinu.
Czy może ktoś sprawdzić poprawność mojego wyliczenia?

[1The1]

Tool here to read pin for e55 type ecu with j2534 cable. For astra h
https://pcmhacking.net/forums/viewtopic.php?f=38&t=6878