Peugeot 206, please help PIN from dump

[Zmann]

Please help extracting PIN form the dump
Peugeot 206 1.4L petrol year around 2004, only BSI taken to me.
BSI Siemens: 9657999780 BSI E02-00 S118085220F
EEPROM 95160

[damih]

Hello,

wrong dump

[benci1982]

Please help extracting PIN form the dump
Peugeot 206 1.4L petrol year around 2004, only BSI taken to me.
BSI Siemens: 9657999780 BSI E02-00 S118085220F
EEPROM 95160

hi. this is virgin dump!!

[Zmann]

Thank you damih. I feel stangely on this dump too. tested with PBSI_calc, no PIN read out. But I read/verify the dump four times with Xprog and UPA all outcomes are the same this one. put here the BSI box/label photo I read, but only the BSI box was taken to me. it was with sign of heavy water in. Any suggestion of why the dump looked wrongly, is the dump looked like of any car (possibility of wrong BSI is sent to me)? or corrupted by watered.

I should ask the guy for VIN to get PIN to work with vingin dump instread?

@benci1982 thank you for the J34p dump, but where is the BSI virgin dump.

[benci1982]

hi. well read out the dump,not wrong, not corruted, simply it is VIRGIN dump.

[damih]

Hello,Zmann here a virgin dump 100% tested recode with PP2000

[damih]

Hello benci I have compare a 2 dump and it's note a same like my virgin dump ,my dump is tested and i have recode some BSI with it ???????

thanks

[Zmann]

hi. well read out the dump,not wrong, not corruted, simply it is VIRGIN dump.
Ah! misunderstanding your first post, you meant my dump has already been virginised. howcome! someone might play with this BSI before it reaching my hand.

well I will have chance to test PP2000 telecode both my dump and damih's. But never done virgin BSI before but only virgin ECU. Can I put 'ANY' PIN in during one of the telecoding step, any attention needed on the existing-used ECU?

Hello damith, thanks for the dump.

[damih]

Hello,Zmann look this

http://www.digital-kaos.co.uk/forums/f152/bsi-pps200-88748/#post432280

[bobbik]

Sorry for archeology , but i've got problem with file above. I've got Xsara Picasso 2007, with the same BSI (9657999780 BSI E02-00 S118085220F) I bouht used one with identical p/n, make virgin with @damih file. I coded it with LEXIA, made same configuration etc. everything went fine, but now my A/C , rain senor and park sensor doesn't work, they all can't comunicate with BSI. This is my own car, old BSI has faulty MCU, permanent "a/c clutch short to ground" fault, (solid state relay is ok).

[mek007]

what ecu is the car equipped with ?

[bobbik]

edc16c36 i suppose. I've got some new infos: it has to be Xsara picasso BSI. Other ones, like Berlingo or 206 will not fully operational, no matter there is same P/N.

[Zmann]

small check A/C operation by BSI/actuator/AC clutch to see if that commands the clutch

If you feel the problem is by software try...go to sw download select BSI. The update should be available and work offline.

[bobbik]

I found same bsi from same car and this solved the problem.