PDA

View Full Version : suzuki Alto immo box



midnightman
30th April, 2011, 09:05 AM
Hello all

I have this immo box from 1999 Suzuki Alto with keys lost. Is it possible to switch off the immo . Its mitsubishi box with part number 33970-70F01. Its memory is 24c01.

Any help is greatly appreciated

d.zio
30th April, 2011, 01:17 PM
IF YOU HAVE ALL YOUR KEYS LOST HOW WILL YOU TURN ON IGNITION?WHY DONt YOU MAKE PROGRAMM NEW KEYS???

ngakson2002
30th April, 2011, 01:41 PM
Hello,
Read memory eeprom x24C01 and post here with TIRIS data from a 4C transponder chip i will add key to your dump ready to start your car.

Regards

midnightman
30th April, 2011, 06:47 PM
Hi thanks for your reply

I am sorry that I forgot to add eeprom memory. File is attached. I have since been given one key that doesn't seem to work . I am new at this and on a learning curve. I don't seem to have any transponder chip inside this key. This is not a remote key. There is one Ic on the pcb with number something like 30f2121 ....03k94 ...d5t21 and e3809 written on pcb

Thanks

ngakson2002
30th April, 2011, 07:08 PM
Dear Mate,
The key that has been given to you and is not working is because data is not in the dump you have sent certainly.
This said, if you have a transponder key reader, read the key you have and sent the Tiris fomat reading here.
I will add this in your dump and it will now work.

Thanks

midnightman
30th April, 2011, 07:22 PM
Hi

Thanks for your reply. There is a history behind this car and I have very little information. This car was with someone for 9 weeks and they couldnt do anything with it in the end. I don't have any key reader.
Is it possible just to disable the immobiliser ? .

keygargoil
30th April, 2011, 09:11 PM
do you have a key programmer you can do this by obd socket you need the ignition on for power to the socket

d.zio
30th April, 2011, 09:38 PM
OR AN OTHER SOLUTION VIRGIN DUMP TO ECU AND PUT EMULATOR

midnightman
6th May, 2011, 09:02 PM
Hi

I have read the information from the key and is as follows

7E D7 AB BC 40 00 00 00 00 9E FA 7E 00 00

Can someone make this key work in this immo dump posted before

Thanks

ngakson2002
6th May, 2011, 09:52 PM
Hello,
With respect to the type of key reader you have used, could you confirm if the key data post here is the Tiris format (when read by zedbull) Tiris data (when read by Tmpro2) or Eep when read by AD900 or AD90?
This is very important info needed when adding key manually.

Good luck

midnightman
6th May, 2011, 11:55 PM
This is the Tiris Format code generated by Zed Bull

7E EB D5 3D 02 00 00 00 00 79 5F 7E 00 00

Thanks

keygargoil
7th May, 2011, 01:34 AM
Hi

I have read the information from the key and is as follows

7E D7 AB BC 40 00 00 00 00 9E FA 7E 00 00

Can someone make this key work in this immo dump posted before

Thanks

this key is already in the dump

midnightman
7th May, 2011, 11:43 AM
Hi

It turns out that this key has worked for a week and now won't start the car.
Does anyone know of immobiliser problems with these cars or maybe and ecu fault
Any help is greatly appreciated

stoyanov
7th May, 2011, 12:59 PM
Check power supply to immo box and engine ECU.Check immobiliser coil.Can you scan for DTC engine ECU,maybe there are other problem.

ngakson2002
7th May, 2011, 01:01 PM
This is the Tiris Format code generated by Zed Bull

7E EB D5 3D 02 00 00 00 00 79 5F 7E 00 00

Thanks

This key is already in the dump and is the only key in this dump.Which surely is the one missing.
Kindly use your Zedbull and read key you are saying here works and stops working and post the tiris data here.

From what i know regarding the immo dump of Such Suzuki it is strange that your dump is that it has only one key in.

Good luck

jnegretti
7th May, 2011, 02:53 PM
Hi, try this file and report please

god luck

midnightman
7th May, 2011, 06:52 PM
Hi

Thanks again. There are no keys working. There was one key working before which i only heard about now. The car was with someone else for a long time. it eventually came back with this new key working ( i dont know about the old key ) . This new key only worked for about a week or so. I was given the immo box to disable it. I think the old key has been deleted and this new one programmed. Maybe if i get the original key and reprogramme it back....maybe that might help a bit more.

keygargoil
8th May, 2011, 12:13 AM
if i were you i would start checking the aerial, fuses etc cause this key is in the dump

Meat-Head
8th May, 2011, 11:04 AM
BUMP

We had one, the ENTIRE wireing harness was rotten on the bulkhead, all little joints.

CHECK ALL LIGHTS WORK HORN< BEFORE VECHILE LEAVES< THIS ONE FAILED MOT ON HEADLIGHTS CAUSE THAT BROKE _ BY ACCIDENT.