PDA

View Full Version : clone or not a clone



Simmyuk
1st May, 2011, 01:08 AM
possible differences between clone and no clone, differences between 1 box i bought and returned and recieved another


1, my old box had a 2 pin power supply which plugged into the back of the box this one is permanent.

2, the ventilation holes on the top of the old box were straight on the new one the outer are curved.

3, i now have a different remote which is classed as the version 3 remote very similar to a sky remote.

4, on the front display with the channel number there is a small green led which is now to the top left side of the channel number but before on the old box it was to the bottom right.

touch wood i've had this box for 10hrs running and had no probs at all so i'm guessing the other box was a clone and was about as much use as a chocolate fire guard so i guess this ends the theory is there clones out there i would say yes there is,hope this will help peeps to get the right box.

Cheers Sim

moulee2009
1st May, 2011, 10:16 AM
Your new box is the same as mine ?

I have flashed it with the latest firmware and all is running good .

I have noticed different remote control versions also . my remote is version 2