Yamaha Mitsuba inmobox xMax 2.5, will not start

[cerramak]

Hello, everyone.

The problem I have is this: it is a Mitsuba inmobox

The owner of this bike Yamaha Xmax 2.5, went for a walk with the bike using the red key, but do not know how lost it. Now the black keys are disabled.

I have read eeprom and I have produced two transponder to tango, but does not start with another peculiarity, that when I connect as real estate on the bike and put the key in ON not even hear the check (test).

I had thought, if someone has a dump of this bike I would be grateful it happened and so I can make the comparison to see where the error.

Thanks for your attention

Best Regards

Agus

[sosmecano]

ME TO I NEED TO KILL IMMO

[garageozcar]

hi

yout mitsuba have eprom inside 24cxx
remove gumm

[keygargoil]

read and post your immo dump

[chris_1111]

hello,can someone post the dump from this 24c04 eprom?
thank you

[gadroulll]

can you tell me where the memory is stored to remove gum

thanks

[keygargoil]

can you tell me where the memory is stored to remove gum

thanks

here is this what your after

[gadroulll]

here is immo file 24c04 can i have the key temic 12

[keygargoil]

try this key data tango doesnt recognise your file
Recognizing transponder...
||||
Transponder recognized as T5
Temic fixed

ID12 - JMA TP04
Data: 66F0 08AB 6000 0040 66F0 08AB 6000 0040

[gadroulll]

i can write only in t5
so i write
66 f0 08 ab 60 00 00 00 is this ok?

[gadroulll]

i write it but bike not starts.

Recognizing transponder...
||||
Transponder recognized as T5
Temic fixed
ID12 - JMA TP04
Data: 66F0 08AB 6000 0040 66F0 08AB 6000 0040

any idea ? bikes flash two times and after it stays open

[gadroulll]

does anyone has correct dump for this?

[gadroulll]

try this key data tango doesnt recognise your file
Recognizing transponder...
||||
Transponder recognized as T5
Temic fixed

ID12 - JMA TP04
Data: 66F0 08AB 6000 0040 66F0 08AB 6000 0040


this data is totally wrong i found by myself the correct data and add to eeprom ,2 used chips instead of one .

i can help a lot for this unit

[koncimobil]

i can write only in t5
so i write
66 f0 08 ab 60 00 00 00 is this ok?

You have to write:
66 0F 10 D5 06 00 00