pin EPEE on MPC555

[grinovsky]

hi
when i want to erease MPC555 with xprogm a window apear:
MPC FLASH is write protected set pin EPEE to 3.3v
where is pin EPEE in MPC555?
please help

[grinovsky]

a picture for chip

[foxdata]

hi
when i want to erease MPC555 with xprogm a window apear:
MPC FLASH is write protected set pin EPEE to 3.3v
where is pin EPEE in MPC555?
please help


hi mate
i found this on google

EPEE (External Program or Erase Enable MPC555,Recommendation: Pull high to 3.3V to allow reprogramming of
the flash.

this is mpc555 manual may be help you.

[grinovsky]

thank you for you answer foxdata (http://www.digital-kaos.co.uk/forums/members/162793-foxdata/)
i trayed with this 2 pins to connect to 3.3v but not work
the EPEE pin is in the green scare but don't locate it yet

[grinovsky]

can i disable immo from immo boxe?

[klonone]

grinovsky
Hi to pin Eppe found?
thanks

[makura]

Having EPEE issues on DME 7 for E90 with MPC564m,need help locating this point.

[makura]

Finally found it my self.DONE

[Listek22]

I had similar problem recently.
I lift up mcu and after locate EPEE pad I traced where it goes. It was pad (marked red) attached to transistor below marked pad. I remove that transistor temporary, bridged EPEE pad with V3.3 and then flash the unit.
216630216631
I hope it's helpful.

[jamam5]

Hello everybody .... new here . like this forum !