clio uch need virgin

[BATLER]

hello all.

i must replace uch of clio1.2 16v 2001 year

with a used one.i tried solution-swap e2prom but no results

maybe someone can virginise the new<used>uch so ican

adapt it with CLIP .

so pls ineed a virgin dump

[gadroulll]

are you sure to take off the battery negative to change the bsi with the eeprom swap and connect the battery again .

even diagnostic can not see and clear the fault code.

[BATLER]

thank you.
i tried but no success.

any virgin file guys?

thanks in advance:smokin::smokin:

[starprog]

thank you.
i tried but no success.

any virgin file guys?

thanks in advance:smokin::smokin:

hi!
check this virgin dump and give me the result

[starprog]

thank you.
i tried but no success.

any virgin file guys?

thanks in advance:smokin::smokin:

sorry!
I make mistakes, I send u for clio II, u need for clio I
please check your pm

[BATLER]

thank you ,,i will try tomorrow morning and report!:beer:

[keygargoil]

have you read the key cos your dump is ok

[BATLER]

thanks.

problem is not immo but electric system,windows door-locking,windscreenwiper.

i tried virgin but clip dont let me adapt it.

learn command is off.i have only dtc and output test!:smokin::smokin:

[starprog]

thanks.

problem is not immo but electric system,windows door-locking,windscreenwiper.

i tried virgin but clip dont let me adapt it.

learn command is off.i have only dtc and output test!:smokin::smokin:


contact me in pm
I can help u

[albertros]

Hi,
I think your car is a 1.2 16v sport? Clio 2 phase 1.

Swaping the 93c46 in the bmt will do the trick it must be the same spec e.g. N3
If the replacement bmt starts the car but has all the same faults you need to look elsewhere for your problem.

You can swap the bmt units without re-programing 93c46 and everthing will work just the car won't start until you re-prog the eeprom

good luck