W203 need Lost Key Dump

[kautuvera]

Hi
can anyone help me with generating key file from this dump?

it is from MB W203 9S12 C209_ZGW 29031504/S

the dump of EIS in attach

thanks in advance

[mercis]

WDB2030421F741624

[kautuvera]

i use nec programmer , I do not want to be single EZS file re- programming

[firestator]

pls dump flash for EIS

[kautuvera]

These files usually do give eeprom

[firestator]

These files usually do give eeprom

I ask you to share flash

[igrr]

please - key4,5 - calculated by SKC MEHACO (http://www.mehaco.com)

[kautuvera]

Hello Friend, the key does not work with your files, format the output switch 021 is between 021 and 051 What difference is there?
Key Type I is small

[igrr]

These dumps 100% of the workers. For programming the NEC microcontroller of key, I use MB Keyprog 2 (http://www.noimmo.lt/equipment/params/78/). When you load the dump is necessary to choose the type of .051 (see picture). Check carefully the quality of soldering and microcontroller EZS and KEY - the problem may be there.

I hope you have not changed anything in the dump ELV and Engine ECU.

[kautuvera]

I have the key number 567897041 is 071 or 061

i use nec programmer

[igrr]

SKC generates three types of dumps
1 .011 - to write only to the old big key with 05E6 MCS ...011
2 .021 - to write to the old big key with 05E6 MCS ...021, ...031, ...041 or NEC key without KEYLESSGO function with ANY NEC MCS type (...061, ...071, ...081, 00040229, ...)
3 .051 - to write to the old big key with MCS ...051 or NEC key without KEYLESSGO function with ANY NEC MCS type (...061, ...071, ... 081, 00040229, ...)

Nec Programmer and MB Keyprog 2 has the same bug - after writing the key starts working only when you insert it into the EZS 6 or more times

[cardoctor]

I have the key number 567897041 is 071 or 061

i use nec programmer

Ahaa ? Your keys 061 and 071 ??
Its implausible number..

[igrr]

Your key 567897041 - is the usual NEC key - it should work without problems

[kautuvera]

Your key 567897041 - is the usual NEC key - it should work without problems

Please generat key file with the build number 021 bye SKC Mehaco

[vanos batam]

Please generat key file with the build number 021 bye SKC Mehaco

hi
here...

[kautuvera]

hi
here...

tested your file does not work, when the red lights turn key switch is turned

[MarkPRP]

If the red light is on when key is turned then it's because of soldering. Joined pins

[Label55]

SKC generates three types of dumps
1 .011 - to write only to the old big key with 05E6 MCS ...011
2 .021 - to write to the old big key with 05E6 MCS ...021, ...031, ...041 or NEC key without KEYLESSGO function with ANY NEC MCS type (...061, ...071, ...081, 00040229, ...)
3 .051 - to write to the old big key with MCS ...051 or NEC key without KEYLESSGO function with ANY NEC MCS type (...061, ...071, ... 081, 00040229, ...)

Nec Programmer and MB Keyprog 2 has the same bug - after writing the key starts working only when you insert it into the EZS 6 or more times

The programs that I know of only MEHACO correctly generates the keys. Please, help me.
http://www.digital-kaos.co.uk/forums/f178/calculate-keys-me-dump-w210-204955/#post1086149

[kikikis2001]

SKC generates three types of dumps
1 .011 - to write only to the old big key with 05E6 MCS ...011
2 .021 - to write to the old big key with 05E6 MCS ...021, ...031, ...041 or NEC key without KEYLESSGO function with ANY NEC MCS type (...061, ...071, ...081, 00040229, ...)
3 .051 - to write to the old big key with MCS ...051 or NEC key without KEYLESSGO function with ANY NEC MCS type (...061, ...071, ... 081, 00040229, ...)

Nec Programmer and MB Keyprog 2 has the same bug - after writing the key starts working only when you insert it into the EZS 6 or more times

Hello, please write how could I recognize which processor I have (I found such a key type identification of Motorola in MB Keprog manual):
1. 567 880 011
2. 567 880 021, 567 880 041, 656 167 20 70
3. 567 880 051, 654 367 2004
- where on processor it is written (I don't find anything)?

Second, .051 means that I could write keys 5-8.bin to Motorola (021 format for key 2-4.bin)?
What will be difference between 021 an 051 (as i see what You have written, I could such a format of key write to NEC without any difference, every format should work).
Does it mean also that I could write format 011 or 021 to old Motorola key and it will work also with EZS from e211 (Motorola 9S12)?
Please explain it me better because I'm new and don't understand it very well:) Best regards.