virgin dump valeo bsi

[honingkoning]

Hello Friends,

I am looking for a virgin bsi dump of a 307 hdi model 2003
fnr: 9651197580 a
Valeo bsi j03-00
fnc:9651196880 a
Ref.ann a12120o
ordre ann: 0267
16/12/03 04:31
controle: 2 5
J03
Boot: 9.31
Cmd: 00337496261103
Puissance: 1571151203
With 95160 eep inside
Thats all mentioned on the sticker.

I tried this bsi with TU it gave the correct millleage,saved it and reprogrammed, read again displayed new milleage and everything looks ok, untill i put bsi back in to car, the car displayed the old milleage again and the car dont start anymore.
When i checked the old data in the TU its all 00000000000
I really dont know what happend but it is very strange never happend to me before.

Can some one also explain me how to get this car working again (i have pp2000).

Regards Honingkoning.

[tachonow]

Get pin from vin and recode all bsi with Planet.

[diga1]

i think tu cant read this bsi from back of board. i broke one bsi from c5 it was valeo then i bought one from p307 it looked the same but culdnt get it working now for exploring i try to read it vith tu from back of the board but no succes it reads something but isnt right file. so dont do this bsi vith tu anymore

[honingkoning]

i think tu cant read this bsi from back of board. i broke one bsi from c5 it was valeo then i bought one from p307 it looked the same but culdnt get it working now for exploring i try to read it vith tu from back of the board but no succes it reads something but isnt right file. so dont do this bsi vith tu anymore

Well thanks for that if i knew this before i would not used the diga,but the strange the right value so there was no doubt if it was a bad file.

But now i need to get this car running again.
Any help is welkom.

Regards Honingkoning.

[tachonow]

Even an empty dump for bsi can be recoded with Planet is you have right pin for car, so go to work and dont cry anymore.

[newgeniehex]

Hello Friends,

I am looking for a virgin bsi dump of a 307 hdi model 2003
fnr: 9651197580 a
Valeo bsi j03-00
fnc:9651196880 a
Ref.ann a12120o
ordre ann: 0267
16/12/03 04:31
controle: 2 5
J03
Boot: 9.31
Cmd: 00337496261103
Puissance: 1571151203
With 95160 eep inside
Thats all mentioned on the sticker.

I tried this bsi with TU it gave the correct millleage,saved it and reprogrammed, read again displayed new milleage and everything looks ok, untill i put bsi back in to car, the car displayed the old milleage again and the car dont start anymore.
When i checked the old data in the TU its all 00000000000
I really dont know what happend but it is very strange never happend to me before.

Can some one also explain me how to get this car working again (i have pp2000).

Regards Honingkoning.
hello
it is original dump virgin whiout programme PPS
work perfect

[honingkoning]

hello
it is original dump virgin whiout programme PPS
work perfect

Thanks i will trie and let you know

[honingkoning]

I reprogrammed the bsi with virgin dump,car starts the only problem i have is that the window in the drivers door does not function, i cant get this one programmed right, any suggestions.

Regards Honingkoning

[dashradio]

Maybe it did not work properly before ?

[z786]

recode options in bsi to look for door module

[honingkoning]

Maybe it did not work properly before ?

I am sure it worked propperly before i think the problem is that the door was open when i programmed bsi, all the other windows work propperly the only window that does not work at all is the drivers window, i am sure this has to do with programming i have heard it before but cant remember where and what the solution was.

i will give it a trie what z786 said and let you know.

[dashradio]

If no joy with that, look for a broken wire in the door opening rubber gaiter, the wires break from bending inside the gaiter with the door opening and closing.

[honingkoning]

If no joy with that, look for a broken wire in the door opening rubber gaiter, the wires break from bending inside the gaiter with the door opening and closing.

Here i am again the problem was the door switch i will replace the switch tommorow,but my last issue is to change the milleage.
I opened the bsi found a 25160 eep inside, the first time i read it with TU it was 245--- now i read with it again TU but keeps coming up with differend milleage.
First it was v3 i dont know if that can change!!!!!
Maybe someone can check the dump and the milleage and if possible change from 245--- to 169234.

Regards Honingkoning

[tachonow]

You have zero km in this dump.
Loggin Y9RN

[honingkoning]

You have zero km in this dump.
Loggin Y9RN

Yes That is right so if i do dash than milleage will change right.

[dashradio]

I had a Dispatch last week that after programming a virgin dump the miles showed zero so had to manually input a mileage in to the Bsi

[honingkoning]

I had a Dispatch last week that after programming a virgin dump the miles showed zero so had to manually input a mileage in to the Bsi

This car is still showing the old milleage so today i will trie to make the new milleage on the dash of this car, i dont like nec but its better than start al over again with the bsi.
I also drove about 10 km today i thought maybe the dash takes milleage from bsi again but i did not.

[honingkoning]

Ok mates last update, i had to make new milleage in dash and in bsi now it works good.

I want to thank everybody for his tribute to silve this problem and i can tell you i learned a lot by doeing this car, and quess what today someone called me for a 307 cabrio 2005/2006.
I think same job as the 2003.

Thanks mates.

[alclot]

Hi honingkoning. Did you remenber how fix the problem with the windows? I have 307 where I changed the battery and now car starts but no work back windows and remote key. Car doesn´t have dtcs in bsi. Any idea?
Thanks in advance ;)


Ok mates last update, i had to make new milleage in dash and in bsi now it works good.

I want to thank everybody for his tribute to silve this problem and i can tell you i learned a lot by doeing this car, and quess what today someone called me for a 307 cabrio 2005/2006.
I think same job as the 2003.

Thanks mates.

[honingkoning]

Hi honingkoning. Did you remenber how fix the problem with the windows? I have 307 where I changed the battery and now car starts but no work back windows and remote key. Car doesn´t have dtcs in bsi. Any idea?
Thanks in advance ;)

In my case the switch was bad, after mounting new window switch unit all was ok.

But i think Tour car have lost coding, i had the same situation in a Peugeot 406 after adding a key with diagbox

All settings where lost (Probaply user error) activate all option with diagbox again and car was good to go.

Wbr Adam.

[stefaudio]

newgeniehex (https://www.digital-kaos.co.uk/forums/member.php/189167-newgeniehex) you save me Ass with the virgin file

thanks


https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/statusicon_blue/user-offline.png