View Full Version : mercedes classe A W169
newgeniehex
8th May, 2011, 07:38 AM
hello
I have change the mileage on the tacho whitout probleme
i try to change the mileage on the ezs but tha cas 3 programmer find xxxxxxxkm??,why??
tachosoft say in the soft
EZS: MC9S12DT128
EZS does not get KM from the IKE:
0410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0470: xx xx xx xx xx xx xx xx xx xx xx xx 55 55 55 55
0480: 55 55 55 55 xx xx xx xx xx xx xx xx xx xx xx xx
do i change the mileage on the ezs or no??
i put the dump of my cas 3 programmer
i need 90000km
thank in advance
newgeniehex
8th May, 2011, 08:04 AM
hello
I have change the mileage on the tacho whitout probleme
i try to change the mileage on the ezs but tha cas 3 programmer find xxxxxxxkm??,why??
tachosoft say in the soft
EZS: MC9S12DT128
EZS does not get KM from the IKE:
0410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0470: xx xx xx xx xx xx xx xx xx xx xx xx 55 55 55 55
0480: 55 55 55 55 xx xx xx xx xx xx xx xx xx xx xx xx
do i change the mileage on the ezs or no??
i put the dump of my cas 3 programmer
i need 90000km
thank in advance
the dump have 212709KM
THANK
antibisic
8th May, 2011, 08:46 AM
it is normal xxxx just put 0 and program
kautuvera
8th May, 2011, 10:09 AM
EZS file is bad
newgeniehex
8th May, 2011, 10:29 AM
EZS file is bad
HELLO
thank for your answer i have read 3 time and i have compare the dump and it is same?????
i t is normal cas 3 programmer find XXXXXkm or no?
many thank in advance
tehnosoftex
8th May, 2011, 10:46 AM
For A class B class the ezs contains mileage crypted very strong. So far I did not heard some one to decrypt it but the solution for modify km is to alter ezs in a way that cannot update the old value. That's why rosfar display xxx insted of a value and if you will write 0 all will be ok. If you verify after that the mileage from ezs with star you will find a very large implausible value.
drpeter
8th May, 2011, 10:47 AM
HELLO
thank for your answer i have read 3 time and i have compare the dump and it is same?????
i t is normal cas 3 programmer find XXXXXkm or no?
many thank in advance
The eeprom content of you EZS should look like this!
kautuvera
8th May, 2011, 11:00 AM
you read another programmer is file, such as XProg , ETL
newgeniehex
8th May, 2011, 11:37 AM
you read another programmer is file, such as XProg , ETL
HELLO
THANK
i put my connection i don't undestnd cas 3 programmer find a good ezs but it find xxxxx
it is normaly
i have read again a new dump and it is same when i compare the old dump!!!
many thank in advance
tehnosoftex
8th May, 2011, 04:42 PM
Your dump seems to be correct but again read my previous post
newgeniehex
8th May, 2011, 07:28 PM
it is normal xxxx just put 0 and program
HELLO
Many thank work perfect!!!!!!!!!!!!!
the car start and the new mileage is good!!!!
my dump is good but it is strange !!!
regard!!!!!!!!!!!:top::beer:
antibisic
9th May, 2011, 09:18 AM
:top:As I told you
sasaran
4th February, 2013, 07:19 PM
please if you can make me km 125 & 150000 km mc9s12dt128 mercedes a clase 2007
karalada
4th February, 2013, 07:47 PM
Remains to be done dash
sasaran
5th February, 2013, 01:27 PM
karalada best I can do and Bordu please
karalada
5th February, 2013, 04:30 PM
Here you go
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.