PDA

View Full Version : Magneti Marelli Vision 5 Mapping Software



scarymistake
8th May, 2011, 10:07 AM
Magneti Marelli Vision 5 Mapping Software

Is there anyone who uses this software and want to share with us

bestr
scary

bazare
8th May, 2011, 10:25 AM
This software can be used to mod files for magneti marelli ecus? like 1.3 diesels?
Does it have a data base with maps?

emiliogsm
8th May, 2011, 10:58 AM
i need it too :)

easytech
8th May, 2011, 11:18 PM
Here you are,

bazare
9th May, 2011, 07:32 AM
Thanks, now how can we load a dump in the program?

grinovsky
9th May, 2011, 08:14 AM
you have to connect to the ecu and load configuration data and start it calibration

levisdj
9th May, 2011, 08:15 AM
At OPEN it requires a *.cfg or *.lps file.That would be like the drivers in ECM ... First load driver, after load file.Now the problem is , where to get the drivers from? :-)

bazare
9th May, 2011, 04:27 PM
software looks nice ... but if we can't use it ... anyway thx for uploading.

easytech
9th May, 2011, 10:52 PM
That's the problem with this system. You get these files when you buy a system. Looks like a Damos file.

I have a CFG for MR600 for a Ducati

grofone
10th May, 2011, 09:31 AM
That's the problem with this system. You get these files when you buy a system. Looks like a Damos file.

I have a CFG for MR600 for a Ducati


i have problem to open your file cfg.

easytech
10th May, 2011, 11:07 PM
There is a problem, this CFG is for Vision 3.8.
Sorry I don't have it for 5.0

scarymistake
11th May, 2011, 05:29 AM
There is a problem, this CFG is for Vision 3.8.
Sorry I don't have it for 5.0
can you upl. V3.8 ???

thanks

levisdj
11th May, 2011, 07:46 AM
Here's the manual, if someone could find some use of if!

easytech
12th May, 2011, 10:53 PM
This is vision 3.8

gezame
15th May, 2011, 11:21 PM
Hi
Sample for AIM.
REgards.

ducatisti
23rd May, 2011, 11:38 PM
I needed this last week after having ! 749 rs on my.dyno .

The dongle including software was 500 pounds .

The vision software has live tps and rpm readings and error code delete . Anyone have the schematics to make the interface ?

ankara06
26th January, 2012, 08:30 AM
I needed this last week after having ! 749 rs on my.dyno .

The dongle including software was 500 pounds .

The vision software has live tps and rpm readings and error code delete . Anyone have the schematics to make the interface ?

need interface pls..

JaboJG
26th January, 2012, 10:25 AM
This software would be handy if we knew where to get the cfg files from. I need one for IAW 48P2.

DDR
16th April, 2012, 09:57 AM
This software would be handy if we knew where to get the cfg files from. I need one for IAW 48P2.

I think Peugeot Sport work with IAW 48P2.38 in the 206 1.6 XS Cup France

mbtuning
16th April, 2012, 12:55 PM
without cfg files software is completely useless.

DemolitionMan
19th July, 2014, 04:41 PM
has not yet figured out how to use this software?

biela
30th July, 2014, 09:45 AM
Have anyone got .PTA and .TAB files for IAW59M Ducati ECU?
Just trying to learn maps from my motorbike.

Vision 3_80 has got an example but is from different ECU.

dmann9999
8th November, 2014, 07:43 PM
Hello, someone have the version 4?
I need version 4.17.08
I have the software on my laptop but I need to reinstall because the sofware have some problems
I't's the vesion for Peugeot 207 s2000
I already have cfg

tryolz
11th February, 2016, 03:10 PM
Thanks that will be usefull !!!

mdnduc
2nd April, 2016, 04:25 PM
Hi
Sample for AIM.
REgards.

Hi guys, I'm glad to see that this forum is still up and working.

I have a 59F decoder and was playing around with an old IAW5AM ECU, testing the software MTuning 5.5 and trying to convert the ECU from HW610 to HW103. However now I cannot revert back, even though the funciton is available on thee software.

I was wondering if you have come across this issue before?

Thank you,
Max

rgnaya
31st October, 2016, 02:34 AM
I think Peugeot Sport work with IAW 48P2.38 in the 206 1.6 XS Cup France

yes i have one of theese ecu and i want to learn about this... do you have anything like damos or mappack or cfg files for it? thanks

faustocedros
20th February, 2018, 05:15 PM
Hi guys
i also need vision 5 for my team bought a 2nd hand Ligier Js53 evo2 to be raced in VdeV and i need that to set the gearbox overrevving protection when downshifting. Thank you

pipis82
24th March, 2019, 05:12 PM
Hello has anyone cracked marelli sra and if anyone has cfg files for this ecu

pipis82
24th March, 2019, 08:19 PM
Hello do you have cfg files for marelli sra ecus

Juan Brasal
14th October, 2020, 10:16 AM
Hello Easytech, Could you repost link for download?? i cannot download file....

Cheers.

vinsk8
16th April, 2022, 01:37 PM
Hi friends, I need CFG file for Marelli MR500 for vision 3_80, somebody can help.....Thanks

vinsk8
16th April, 2022, 01:45 PM
Sorry the model is MAR500

joar27
14th September, 2022, 06:39 PM
Hi
is there anybody there who has the dowload link for vision 5?

Daniel Siune
15th November, 2022, 04:13 AM
The software link please?