PDA

View Full Version : immo off for Passat 1,6 5wp4 3311 10


JFR-Tuning
11th May, 2011, 05:25 PM
Hi,

i need your help please for a file Immo off andthe PIN.

VW Paasat Bj2000 1,6
ECU Siemens Simos 3,4 0009
5WP43311 10
VW 3BO 906 018
EEprom > 93C76

File org :afraid:
JFR-Tuning
11th May, 2011, 06:46 PM
can i use the same from the tool " car Tool " there is a 93c76 for menue audi a3 1,6
JFR-Tuning
12th May, 2011, 05:42 AM
use help please
ammarben
12th May, 2011, 07:06 AM
your file is corrupted .read again
JFR-Tuning
12th May, 2011, 07:50 AM
your file is corrupted .read again
Thanks that will be a problem.

I read it and testet with car tool for audi a3 1,6 93C76

so i dosent have the original on the EEprom>> only this i read.

Than there were a problem bevore i read so that was the reasen the car never start

Can some on help me with an orginal?

or with a file what is with immo of?

Frank

I take this one test it
JFR-Tuning
12th May, 2011, 09:16 AM
Have some one the original ,better this one with immo off for a 1,6 Code ANA Simens Simos 3,4

Thanks a lot
JFR-Tuning
12th May, 2011, 10:42 AM
please i need your help,

thanks
JFR-Tuning
12th May, 2011, 11:11 AM
Must I also remove the flash 29F400

Thanks
JFR-Tuning
13th May, 2011, 05:52 AM
please need your help.

Doesen?t someone have a original or clean dump for this ECU
fuktak
13th May, 2011, 06:35 AM
Check this
JFR-Tuning
13th May, 2011, 06:41 AM
Thanks a LOT ~~~tak ....

i testet 3 one, but now one will works.

User here tells me the org. file is broken.Thatcan be. Because the dealer dosen?t can learn the immo.

Code 4.That they, a prozess ist stopped. It was the owner of the car with VCDS.

So i check it this morning.

So belongand they another time firstly thanks

With wich tool you works.?

Frank
ankara06
13th May, 2011, 09:37 AM
its tested immo off OK
JFR-Tuning
13th May, 2011, 02:27 PM
sorry ~~~tak, it dosen?t work

<Thanks , other idear
JFR-Tuning
15th May, 2011, 02:52 PM
its tested immo off OK

@ ankara

Thanks a lot but i need the pass for the file

Can you send me per PM

Frank
JFR-Tuning
20th May, 2011, 05:54 AM
Hi.

Thanks a lot for your help

firstly with all files It dosen?t work,,:manuflag:
But i fond the reason...

I change the dash and then it works. The problem was that the dealer want to prgram the dash. He stop it in the prozess.I think that was the reason.

But after i change

But thanks a lot

Frank