need pin for audi 98 from dump

[spider2004]

hi friends
plz i need pin from dump this audi a4 98 1.6
pics and file in attatchment
i have got file from eeprom 93c56 inside siemens ecu because i didnt find immo near steering column or in dashboard
thanks in advance

[Autofix]

I think 98 A4 is immo 2, if so no pin in ECU.

Is immo at address 17 or 25? Do you see vin number in immo or just immo ID number?

(PS you didnt post any dump)

[spider2004]

I think 98 A4 is immo 2, if so no pin in ECU.

Is immo at address 17 or 25? Do you see vin number in immo or just immo ID number?

(PS you didnt post any dump)
thanks friend
file in attatchment
from 93c56 inside siemens ecu because i coudnt find any immo ,and also in dash coudnt find 93c56 or 93lc56
plz tell me if u know immo location
thanks in advance

[Autofix]

Answer the two questions I posted above.

First you must know what system you have. If you have immo2 then the pin is not in the ecu.
Its very simple, address 17 is the cluster and 25 is seperate immo box. Immo2 will show 14 digit immo ID but not 17 digit VIn. Immo 3 will show both 14 digit ID and VIN.

If you have immo3 then you should post the ECU info too.

[spider2004]

Answer the two questions I posted above.

First you must know what system you have. If you have immo2 then the pin is not in the ecu.
Its very simple, address 17 is the cluster and 25 is seperate immo box. Immo2 will show 14 digit immo ID but not 17 digit VIn. Immo 3 will show both 14 digit ID and VIN.

If you have immo3 then you should post the ECU info too.
thanks a lot do u have pics for immo location in the car

[haroutioun]

Hi.please connect your scan tool to the car .after go to dush 17 read fault and save the fault, i thing when you save .you can have all information about you dush .so after send the fault file to as ,to see what kind of dush you have, to know if the eeprom 93c56 is in your dush or not .(why you need pin code is the car working starting or you wont to do 1 more key?..) waiting for you...

[spider2004]

Hi.please connect your scan tool to the car .after go to dush 17 read fault and save the fault, i thing when you save .you can have all information about you dush .so after send the fault file to as ,to see what kind of dush you have, to know if the eeprom 93c56 is in your dush or not .(why you need pin code is the car working starting or you wont to do 1 more key?..) waiting for you...
thanks friend
all keys are lost
i have only T300-SBB AND X-PROG M
THANKS IN ADVANCE