View Full Version : uPD780824B Reading
pnj
15th May, 2011, 10:36 AM
Hello All
Need to read uPD780824B, have UPA-USB with adaptor for this.
Anyhow get some baudrate error reading this B version, does anybode know if supported as manaul only says A version ?
Thanks in advance
teed
15th May, 2011, 11:47 AM
Nec is from BSI reno or peugeot?
pnj
15th May, 2011, 11:52 AM
Hello ted
NEC is located in Peugeot Dash some made by Magnetti Marelli
teed
15th May, 2011, 11:58 AM
you need up leg
pnj
15th May, 2011, 12:06 PM
OK IC
Can you confirm this ECU 100% ?
Now I have mowed to adaptor plate normally not needed to lift legs here, and still get "baudrate capture error"
Best Regards
pnj
15th May, 2011, 12:12 PM
Just found bad soldering seems it reads now on the adaptor plate
Sorry for the trouble ;-)
teed
15th May, 2011, 12:35 PM
:-) ok - sunday - no work :--)
pnj
15th May, 2011, 12:39 PM
Better stop :-) you are right !
Anyhow I concider this as hobby not work :-)
goranradovicpg
15th May, 2011, 01:36 PM
you must resolder mcu and put in upa usb socket. read 100%
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.