vito dashboard

[leonel]

Hello everyone!
I am new user of this very good forum and I hope we can help each other in electronic problems!

I have problem with vito dashboard. I have broken motorola 908 and I need eeprom+flash for dashboard
A0004467321
HW:35-99
SW:22-99

Thanks

[vuno01]

what have you done to break it
mileage, What?

[mercis]

MC68HC908AZ60 2J74Y processor already programmed for repair Mercedes Benz Vito CDI 1999-2004 dashboard (http://www.codecard.lt/electronics/2j74y/mercedes-benz-vito-mc68hc908az60-2j74y-processor-already-programmed-for-repair-mercedes-benz-vito-cdi-1999-2004-dashboard/prod_125.html)

[deffc0n]

You have broken mehanical motorola or software ?

[chichomeyer]

how did you break it? i had once broke the display on it but never the motorola 908

[gabeneil]

i had problem on vito dash display, i broke the flat pixel connector,is anybody who can help me to fix it? i order flat connector and t-head but no idea on how to solder. need help.
thanks in advance.

[LoRaier]

Hello everyone!
I am new user of this very good forum and I hope we can help each other in electronic problems!

I have problem with vito dashboard. I have broken motorola 908 and I need eeprom+flash for dashboard
A0004467321
HW:35-99
SW:22-99

Thanks


How many buttons does it have? 2 or 4?...with or without external ambient temperature display?. I have some dumps, if you answer that questions I can post the one more suitable

[LoRaier]

i had problem on vito dash display, i broke the flat pixel connector,is anybody who can help me to fix it? i order flat connector and t-head but no idea on how to solder. need help.
thanks in advance.

Very important to clean very well surfaces (board and display) with solvent. Normally flat connectors are auto-adhesive, if not, you can apply some heat (not much) with a special T-shape tool. Take care of perfect alignment of the contacts.

[gabeneil]

Hi all,

How do i align the pixel flat connector to lcd display? I dont see any markings or track to stick on it? Anybody help.

thanks in adv.

[LoRaier]

Hi all,

How do i align the pixel flat connector to lcd display? I dont see any markings or track to stick on it? Anybody help.

thanks in adv.

Well, is a bit tricky. The track markings are difficult to see in the glass display. With a magnifying glass and trying to view from different angles you will see the contact lines.

Be patient, with a bit of practice you'll get it.

[gabeneil]

Anybody who can tell me on how to power up mercedes vito 110cdi dashboard without connecting in van? what pin no. in the plug should i use?

thanks.

[LoRaier]

Anybody who can tell me on how to power up mercedes vito 110cdi dashboard without connecting in van? what pin no. in the plug should i use?

thanks.

Black connector:

pin 4 and 9 are +
pin 1 is -(GND)
pin 13 is speed signal

[tas_daz]

have anyone to send me the file for vito dash full.or only the flash and put mine eprom?thanks a lot

[arokon]

i need flash dump for the same dash, anyone can help me please.