PDA

View Full Version : Question: 407 1.6HDI 110 Maps



kerman19
16th May, 2011, 01:38 PM
I have the same ECU as in this post Here (http://www.digital-kaos.co.uk/forums/f175/peugeot-407-1-6hdi-fap-off-193183/). Same HW, SW & Checksum.

What I would like to know is, when I compared my ECU dump to the no FAP dump using WinOLS I noticed the following MAPs where changed.

16B386
16B7A4
172D28
173190
17364C
1EC804
1ECC6C
1ED128

If anyone would like to be so kind as to name the other maps too, that'd be great, but by no means essential.

Thanks

Phil

kerman19
16th May, 2011, 08:30 PM
Or does anyone have the ECM driver for this ECU?

EDC16C34 1037377754

psico
16th May, 2011, 10:17 PM
i have problem with 407 hdi 1.6 and sw 248 not driver for ecm

scarymistake
17th May, 2011, 11:03 AM
Or does anyone have the ECM driver for this ECU?

EDC16C34 1037377754
You can also create your own driver

look here
http://www.digital-kaos.co.uk/forums/f173/ecm-6-3-drivers-206257/

kerman19
17th May, 2011, 01:40 PM
I'm assuming that only really works If I already know the location of the MAPS?

If I did, I wouldn't be using ECM, I'd be using WinOLS.

Interesting none the less as I'll make a driver once I do find out the MAP locations.

Thanks

Phil

scarymistake
17th May, 2011, 04:01 PM
I'm assuming that only really works If I already know the location of the MAPS?

If I did, I wouldn't be using ECM, I'd be using WinOLS.

Interesting none the less as I'll make a driver once I do find out the MAP locations.

Thanks

Phil
i tink i have him
try and let us know

kerman19
17th May, 2011, 08:08 PM
i tink i have him
try and let us know

It's close, the injection maps are a little out though, first few lines on either axis are -100, and the upper values are in the 10000's, no amount of offset makes the values look right.

My HW and SW is the same, would that make my driver P754_754? Or am I not understanding the naming convention right?

I've attached a RAR of my Drivers folder, as I've downloaded quite a few different sets and combined them all, so I might have some that others don't.

Thanks,

Phil

scarymistake
18th May, 2011, 05:31 AM
It's close, the injection maps are a little out though, first few lines on either axis are -100, and the upper values are in the 10000's, no amount of offset makes the values look right.

My HW and SW is the same, would that make my driver P754_754? Or am I not understanding the naming convention right?

I've attached a RAR of my Drivers folder, as I've downloaded quite a few different sets and combined them all, so I might have some that others don't.

Thanks,

Phil
yes you driver name is p754_754
you can adjust the driver from me to you one need

by accident is that my folders are on the same addresses.
my details you can use to create your own driver.

Injection at part throtle [5]
1E547A 16X24 INJECTION (000000) K Factor 16
1E57CE default 5
115B22 deafult 3
115E76
1E6496

Injection (Ext.) [1]
1E61C2 16X20 INJECYION (000000) K Factor 16
default 5
deafult 3

Rail pressure [3]
1F08A8 16X16 INJECTION (1F0868) K Factor 4
1F0AEC Webwer 5
1F0F74 default 1

Rail pressure # 2 [1]
1F11D0 16X16 INJECTION (1F1190) K Factor 4
Webwer 5
default 1

Phase of injection [1]
1C3716 16X16 INJECTION (1C36D6) K Factor 4
Webwer 5
default 1

Fuel during acceleration [3]
1C165E 16X7 INJECTION (1C1630) K Factor 4
1C18A2 Webwer 5 v 32768
1C1AE6 default 1

Fuel during acceleration (Map 2) [1]
1C1D1E 10X7 INJECTION (1C1CFC) K Factor 4
Webwer 5 v 32768
default 1

Fuel during acceleration (Map 3) [2]
1C1EFE 17X7 INJECTION (1C1EDO) K Factor 4
1C2142 Webwer 5 v 32768
default 1

Rail pressure control [1]
1C45CC 16X8 INJECTION (0000) K Factor 4
Webwer 5
default 3

EGR [2]
1C29C4 18X1 INJECTION (1C29A4) K Factor 16
1C2A06 Webwer 5
default 1

EGR #2 [2]
1CE6BE 18X1 INJECTION (1CE69E) K Factor 16
1CE700 Webwer 5
default 1

??? [1]
1CCB16 16X16 INJECTION (1CCAD6) K Factor 16
Webwer 5
default 1

??? #2 [2]
1CCD5A 16X16 INJECTION (1CCD1A) K Factor 16
1CCF9E Webwer 5
default 1

??? #3 [1]
1CD426 16X16 INJECTION (1CD3E6) K Factor 16
Webwer 5
default 1

Turbo pressure [2]
1EACA8 16X16 TURBO (1EAC68) K Factor 4
1EAEEC Webwer 5
default 1

Turbo pressure f)temp.) [2]
1EB374 16x16 TURBO (1EB334) K Factor 4
1EB5B8 Webwer 5
default 1

Overboost [2]
1E8AD0 16X16 TURBO (1E8A90) K Factor 4
1E8D14 Webwer 5
default 1

Troque limiter [1]
1CB712 19X1 LIMITER (1CB6EC) K Factor 16
Webwer 5
default 1

Troque limiter #2 [1]
1CB7D4 16X1 LIMITER (1CB7B4) K Factor 16
Webwer 5
default 1

Troque limiter #3 [3]
1EFE20 16X1 LIMITER (1EFE00) K Factor 16
1EFE62 Webwer 5
1EFEA4 default 3

Rail pressure limiter [1]
1F165E 12X8 LIMITER (1F1636) K Factor 4
Webwer 5
default 3

kerman19
18th May, 2011, 01:30 PM
yes you driver name is p754_754
you can adjust the driver from me to you one need

by accident is that my folders are on the same addresses.
my details you can use to create your own driver.

Injection at part throtle [5]
1E547A 16X24 INJECTION (000000) K Factor 16
1E57CE default 5
115B22 deafult 3
115E76
1E6496

Injection (Ext.) [1]
1E61C2 16X20 INJECYION (000000) K Factor 16
default 5
deafult 3

Rail pressure [3]
1F08A8 16X16 INJECTION (1F0868) K Factor 4
1F0AEC Webwer 5
1F0F74 default 1

Rail pressure # 2 [1]
1F11D0 16X16 INJECTION (1F1190) K Factor 4
Webwer 5
default 1

Phase of injection [1]
1C3716 16X16 INJECTION (1C36D6) K Factor 4
Webwer 5
default 1

Fuel during acceleration [3]
1C165E 16X7 INJECTION (1C1630) K Factor 4
1C18A2 Webwer 5 v 32768
1C1AE6 default 1

Fuel during acceleration (Map 2) [1]
1C1D1E 10X7 INJECTION (1C1CFC) K Factor 4
Webwer 5 v 32768
default 1

Fuel during acceleration (Map 3) [2]
1C1EFE 17X7 INJECTION (1C1EDO) K Factor 4
1C2142 Webwer 5 v 32768
default 1

Rail pressure control [1]
1C45CC 16X8 INJECTION (0000) K Factor 4
Webwer 5
default 3

EGR [2]
1C29C4 18X1 INJECTION (1C29A4) K Factor 16
1C2A06 Webwer 5
default 1

EGR #2 [2]
1CE6BE 18X1 INJECTION (1CE69E) K Factor 16
1CE700 Webwer 5
default 1

??? [1]
1CCB16 16X16 INJECTION (1CCAD6) K Factor 16
Webwer 5
default 1

??? #2 [2]
1CCD5A 16X16 INJECTION (1CCD1A) K Factor 16
1CCF9E Webwer 5
default 1

??? #3 [1]
1CD426 16X16 INJECTION (1CD3E6) K Factor 16
Webwer 5
default 1

Turbo pressure [2]
1EACA8 16X16 TURBO (1EAC68) K Factor 4
1EAEEC Webwer 5
default 1

Turbo pressure f)temp.) [2]
1EB374 16x16 TURBO (1EB334) K Factor 4
1EB5B8 Webwer 5
default 1

Overboost [2]
1E8AD0 16X16 TURBO (1E8A90) K Factor 4
1E8D14 Webwer 5
default 1

Troque limiter [1]
1CB712 19X1 LIMITER (1CB6EC) K Factor 16
Webwer 5
default 1

Troque limiter #2 [1]
1CB7D4 16X1 LIMITER (1CB7B4) K Factor 16
Webwer 5
default 1

Troque limiter #3 [3]
1EFE20 16X1 LIMITER (1EFE00) K Factor 16
1EFE62 Webwer 5
1EFEA4 default 3

Rail pressure limiter [1]
1F165E 12X8 LIMITER (1F1636) K Factor 4
Webwer 5
default 3

Thanks, I'll post the driver here when I'm done.

Phil