PDA

View Full Version : range rover



radiosolutions
16th May, 2011, 05:35 PM
fuse 9 in the becm keeps blowing, very strange as it controls electric windows and central locking, when i put ign on the windows work fine, its only at the stage i turn car over which the fuse blows, does anyone no what else this fuse controls, it also comes up on speedo display fuse 9 failed, thanks

d.zio
16th May, 2011, 06:29 PM
CHECK FOR BROKEN WIRES TO THE DOORS......OR TAKE OUT EACH WIRING OF EACH DOOR SEPERATELY AND TEST.......CHECK THE ELECTRICAL PART OF THE IGNITION SWICH(I HAD AN ISSUE LIKE YOUS WITH FIAT DUCATO..)

radiosolutions
16th May, 2011, 06:35 PM
thanks for the reply m8, but if it was broken wires to the doors surely this would happen when i put the ign on and operate them, it only happens when i turn car over, thanks

d.zio
16th May, 2011, 06:40 PM
I TOLD THIS BECAUSE AS YOU KNOW TO OUR JOB HAPPEN SOME TIME UNBELIEVABLE AND UNEXPECTABLE THINGS WHICH SOMETIMES YOU CANT EXPLAIN THEM....SO IF I WAS YOU I WOULD CHECK THEM TO BE 100%SURE....IT IS 15MINUTES JOB.....ANY WAY YOU KNOW BETTER!!!!;)