View Full Version : Seat Siemens 5WP4 176
Blayders
17th May, 2011, 12:25 AM
Hi ,
I need immo off from this ecu .
ECU
Siemen 5WP4 176
ImmoBox
Siemens 5WK4 678
1 H0 953 267 BB
Thanks
teuton
17th May, 2011, 12:37 AM
Post your dump.
Blayders
17th May, 2011, 12:52 AM
From which ??
in Ecu is NM27c256QE and TC97101P
in ImmoBox is Motorola HC05 (3D33J)
aliali18
17th May, 2011, 01:04 AM
From which ??
in Ecu is NM27c256QE and TC97101P
in ImmoBox is Motorola HC05 (3D33J)
Ecu la EEPROM 93C56
lupu_sandu
17th May, 2011, 01:18 AM
Read HC05 from immo.
Best way to make immo-off.
Blayders
17th May, 2011, 02:16 AM
hc05b6 dump
teuton
17th May, 2011, 02:45 AM
immo off dump
Blayders
18th May, 2011, 12:27 PM
Engine start and stop . I must immo off in ecu !!! How to read TC97101P ??
Blayders
24th May, 2011, 10:06 PM
How to adaptation ecu to immobox ??
haroutioun
25th May, 2011, 08:01 AM
HI,
ABOUT How to adaptation ecu to immobox :
1) CLEAR FAULT MEMORY FROME ENGINE ECU & FROM IMMO BOX .AFTER ENTER TO (25) IMMOBILIZER WITH SCAN TOOL AFTER (10) ADAPTATION & WRITE (00) IN THE CHANEL AFTER ENTER OR CLIC OK ,TO ADAPT IMMO BOX TO ENGINE ECU...
GOOD LUCK
Blayders
4th June, 2011, 11:41 AM
Immo emulator it does not work . any other ideas ?
emanuel2010
4th June, 2011, 05:15 PM
free immobilizer coil is mounted readers.make contact 30 seconds.ingnition off.engine start sure.
lupu_sandu
4th June, 2011, 07:53 PM
Blayders (http://www.digital-kaos.co.uk/forums/members/75126-blayders/): teuton solution is OK.
You have another problem with car (W-line fault, etc).
Immo off in immo-box is a tested solution for VAG cars.
Blayders
5th June, 2011, 11:42 AM
i do immo off in immo-box and it does not work !! :( The car its seat toledo 1997r. 2.0 8v engine 2e (115 KM) .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.