Audi A6 2,7 tdi DPF remove

[chikiloksik]

Hi People.
really need your help. need to remove the DPF. Audi A6 2.7 TDI. 2006. EDC16CP34.
ECU 0281013833. edited ECU Safe 2.0 cracked + WinOls 1.5 from this forum . Probably an error somewhere.
Please check my file.
In attachments to the original dump and corrected.
All read with X-prog M (china)
Thanks in advance. very necessary.

[emiliogsm]

Hi People.
really need your help. need to remove the DPF. Audi A6 2.7 TDI. 2006. EDC16CP34.
ECU 0281013833. edited ECU Safe 2.0 cracked + WinOls 1.5 from this forum . Probably an error somewhere.
Please check my file.
In attachments to the original dump and corrected.
All read with X-prog M (china)
Thanks in advance. very necessary.

try it mate , write flash+eprom

[chikiloksik]

try it mate , write flash+eprom

Thanks. I will check tomorrow and report back.

[chikiloksik]

Thanks. I will check tomorrow and report back.

Does not work. No dynamics. Immediately after the start everything is fine, but after half a kilometer lost traction. Errors in the diagnosis of no.

[blade66]

we have the same problem, after half kilometer ,the engine have no power , and ecu goes in emergency program !!!

here is the original File,
Please can someone help to remove only DPF

thanks
bye

[macxlulu]

I can help .... pw

[blade66]

great, if you can help, please post transformed file here
thanks, i give feedback, if it ok with this file

[chli1976]

Try this Version

[alexs307]

This is done manually, no ecusafe bullshit.

Try it and report. It should work.

[chli1976]

Try this Version

I have done it also manualy

[blade66]

If i Write your file , i answer you the result , thanks to you


Sent from my iPhone using Tapatalk

[alexs307]

@blade...this dpf off file is not for your file...will do this now...the file is for chikiloksik...

[chli1976]

If i Write your file , i answer you the result , thanks to you


Sent from my iPhone using Tapatalk

i have send you PW in PN

[alexs307]

@blade66 ...

Also try this. See what version works. Or maybe both work.

[blade66]

@chli1976

after flashing, the "Glow plug system" blinks constantly, i start the motor, blinks not end :(

(http://www.digital-kaos.co.uk/forums/members/57721-chli1976/)

[blade66]

@alexs307

your file work, but only one problem, after test drive, the
"Glow plug system" blinks constantly

the motor no longer goes into the emergency program :)

but only the "Glow plug system" blinks constantly


Can you view and edit the file again please

[chli1976]

What error code ?

[alexs307]

Make a full erase of DTC's.

[levisdj]

Glow plug blinking usually is from the timer relay that times the glow plugs.Write the original file, clear DTC's and see if glow plugs turn on/off![Pretty sure they should work fine.] 2.7 TDI has a different DPF measuring system, that's why ECUSAFE can't remove it.Good luck

[alexs307]

@blade66
Try this.