UPA Test Fail

[justy22]

I have an original UPA and ran the hardware test it came up and reported to have failed test 7 details below, does this mean my upa is faulty?

Test7: P1=13V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=12.68V, P2=0.00V (L), P3=0.00V (L), P4=0.00V (L),P6=0.00V (L), P7=0.00V (L), P8=0.00V (L), P9=0.00V
P1(12.68V ) not in 12.70V - 13.30V
Test Failed

[PierreTheron]

I have an original UPA and ran the hardware test it came up and reported to have failed test 7 details below, does this mean my upa is faulty?

Test7: P1=13V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=12.68V, P2=0.00V (L), P3=0.00V (L), P4=0.00V (L),P6=0.00V (L), P7=0.00V (L), P8=0.00V (L), P9=0.00V
P1(12.68V ) not in 12.70V - 13.30V
Test Failed


Hi ... Do ot know..

Contact supplier and ask to correct it..........:pcguru::D:D

[deffc0n]

You use first time ?

[martij976]

I have an original UPA and ran the hardware test it came up and reported to have failed test 7 details below, does this mean my upa is faulty?

Test7: P1=13V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=12.68V, P2=0.00V (L), P3=0.00V (L), P4=0.00V (L),P6=0.00V (L), P7=0.00V (L), P8=0.00V (L), P9=0.00V
P1(12.68V ) not in 12.70V - 13.30V
Test Failed

I had same result with my upa and ask mr. Penko.
He replays to not be worry about test 7 failed.
He said " Your programmer is OK. Test 7 error is don't care"

My programmer has no issues even with test 7 failed tho..
cheers

[teed]

Your UPA no have 12,68 Volt -0,02 V - that in no problem
Your UPA is OK - change wire USB or change port USB