Passat 2007 VW8 airbag

[florinyes]

Hello lads

can anyone help us with this airbag? Or even better if anyone got a good known dump or a virgin..

Car has a few fault codes wich won't clear..All checked and can only blame control module..

25lc640 3C0 909 605F

[elephantul]

try this thx to credoline, pass in pm

[florinyes]

Anyone may have a virgin dump of one of this?? Still can't get rid of 3 fault codes..wiring and airbags tested by someone else (a guy working for VW)..

I also think someone may have been playing with coding??


Saturday,21,May,2011,11:55:52:48349
VCDS Version: Release 10.6.4
Data version: 20110418



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Address 15: Airbags Labels: 3C0-909-605.lbl
Control Module Part Number: 3C0 909 605 F HW: 3C0 909 605 F
Component and/or Version: 02 AIRBAG VW8 029 2421
Software Coding: 0012338
Work Shop Code: WSC 05311 000 00000
VCID: 29538984F969
3 Faults Found:

01587 - Igniter 2 for Airbag; Drivers Side (N250)
001 - Upper Limit Exceeded - MIL ON
00590 - Igniter 2 for Passenger Airbag (N132)
001 - Upper Limit Exceeded - MIL ON
01738 - Crash Sensor for Front Airbag; Drivers Side (G283)
010 - Open or Short to Plus - MIL ON

[automotor69]

HI,here dump ok no crash.

[florinyes]

HI,here dump ok no crash.


Hi mate

can I just ask how did you come up with this dump? It looks well out..It looks more like another dump than my dump cleared..

Not an expert on this field but let just keep it decent..We can't just play with airbags..I do appreciate you trying to help..Is this a tested dump?

Regards

[automotor69]

HI,This dump is read from a functional car.

[mcm44]

01587 - Igniter 2 for Airbag; Drivers Side (N250)
001 - Upper Limit Exceeded - MIL ON
00590 - Igniter 2 for Passenger Airbag (N132)
001 - Upper Limit Exceeded - MIL ON
01738 - Crash Sensor for Front Airbag; Drivers Side (G283)
010 - Open or Short to Plus - MIL ON

VW Passat B6 2005-2006 has two-step front airbags.
VW Passat B6 2007+ has one-step front airbags.

It looks like, someone had put airbags from newer version of B6, to the older one (or the SRS unit itself has been replaced). First and second fault can concern that.

[florinyes]

That's what I thought mate..In the first place I thought someone played with long codding as the car doesnt look like is been smashed.

I'll have the car in this morning for proper checks. I also have a quite big number of dumps from different versions..Starting point will be checking on etka if control module fitted is the right one for this car..

I'll post the outcome later on..

Regards

[florinyes]

HI,here dump ok no crash.


Hi mate

improvement with your dump..got rid of one fault code..so only 2 flagging now..

01587 - Igniter 2 for Airbag; Drivers Side (N250)
001 - Upper Limit Exceeded - MIL ON
00590 - Igniter 2 for Passenger Airbag (N132)
001 - Upper Limit Exceeded - MIL ON

This has to be related to 2 stage airbags this being a one stage..

Keep trying..

[florinyes]

Anyone knows where about is this info located in dump?

Stage 2 driver and passenger airbag?

Tried almost everything to no avail..

[haroutioun]

hi dear, if you wont try to disconnect the connector of
Stage 2 driver and passenger airbag .and live stage 1 driver and passenger side airbags ,after clear the fault it must to work .pls try.
good luck

[florinyes]

hi dear, if you wont try to disconnect the connector of
Stage 2 driver and passenger airbag .and live stage 1 driver and passenger side airbags ,after clear the fault it must to work .pls try.
good luck


Not sure I understand what's your suggestion ..?

[haroutioun]

hi, in your emails i read :you write new dump in your airbag unit ,after all faults go out but only be in the system Stage 2 driver and passenger airbag ,is not cleard .(is right?)
i thing if you disconnect the connector of driver & passenger stage 2 . after clear the faults ,after i thing your system well work good. becaus your dump is with (stage 1) not with (stage 2) system.... sorry about me english...

[Keithuk]

EOBD II Error Code: 01587

Fault Location:
Igniter 2 for Airbag; Drivers Side (N250): Upper Limit Exceeded

Possible Cause:
Airbag Warning Light active.
Wiring from/to Igniter 2 for Airbag; Drivers Side (N250) faulty.
Coil Spring with Slip Ring (F138) faulty.
Igniter 2 for Airbag; Drivers Side (N250) faulty.

Possible Solutions:
Check Wiring from/to Igniter 2 for Airbag; Drivers Side (N250).
Check Coil Spring with Slip Ring (F138).
Check Igniter 2 for Airbag; Drivers Side (N250).


EOBD II Error Code: 01738

Fault Location:
Crash Sensor for Front Airbag; Drivers Side (G283)

Possible Cause:
Airbag Light is on.
Malfunction Indicator Light (MIL) ON.
Wiring and/or connections faulty.
G283 is faulty.

Possible Solutions:
Check wiring and connections for G283.
If connections are ok, change passenger side crash sensor (G284) with drivers side sensor (G283). If the fault change also, you found a faulty sensor.Replace it.
If changing G283 with G284 does not change the fault, then check wiring between G283 and Airbag Control Unit.

[florinyes]

Car is gone now..After spending about 5 houres and pressure from customer I sent him to main dealers..for a new airbag module..

Cheers