PDA

View Full Version : Smart locked ECU help



rossoelab
21st May, 2011, 08:44 AM
hello
reading at the end of the flash with cock 1260 (boot mode) error message
I did not know that one must first read the serial eeprom
I have some hope to recover this ECU?
Many thanks to those who can help me

vuno01
23rd May, 2011, 01:28 AM
remove and read the eprom on a programer like
gq 4x and then rewrite it
and its fixed

filecloud
23rd May, 2011, 07:12 AM
hello
reading at the end of the flash with cock 1260 (boot mode) error message
I did not know that one must first read the serial eeprom
I have some hope to recover this ECU?
Many thanks to those who can help me

Your file is fine and your eeprom is also fine. Re-write the same stock file in the car again and the eeprom will correct itself. Switch gear to neutral before you flash and after flash switch ignition off and wait for the cluster to shut down before you try to start. Takes roughly 30 seconds. Important!
greetings,
filecloud

rossoelab
23rd May, 2011, 07:18 PM
I rewrote the original file and everything is correct
The ECU is back to work well
thank you very much

vuno01
27th May, 2011, 12:02 AM
when you sayd its locked i assume that you could
no longer read or write (Thats Lock)