Kein System

[Bazzit]

Hi

Had stuck my box into Kein System by Phlashing
a 2x on to my 1x box, Tried to flash an image by using
FlashAssit from the H'berg site, was able to connect fine,
it ran for about an hr the LCD just said back up and a
progress box filled up, on the pc the dialog box just said flashing.
In the end it said FlashA had encountered a problem and needed to
close so no joy.

can any one assist

Thanks

[father ted]

are you using a null modem cable to use ifa? try this version of IFA I use this on 64\32bit Vista and XP with no install its the latest version of IFA

[Bazzit]

Was that just resting in your acc Ted??

I didnt use a null modem cable, is it essential?

[father ted]

Was that just resting in your acc Ted??

I didnt use a null modem cable, is it essential?

if you want to use ifa yes i use a null modem cable plus a crossover cable i think they say if you do it that way it has 30 times better chance of it connecting

[Bazzit]

Where does a Null Modem Cable connect??
I'm not thick or anything just have never needed to
connect one before!!

Once had dinner with the late great DM Rip an absolute gent
he was just as funny in real life loved a glass of Red or 2.

[Dreamer]

Your not thick. If you've never done it then how do you know?

I'm new too but you can learn lots if you read the guides and other posts.

There is a nine pin D shaped connector on the back of your box. Make sure you get a null modem cable. If you want to read how to use the software, there are guides in the downloads section in Dbox-guides. I think you are looking for the IFA guide.

[Bazzit]

Will do dreamer,
One Q' do you know if the flash is successful using IFA
Null modem cable and Crosover cable will I be able to
FTP on to the box again,

[Dreamer]

You will either be using an ethernet crossover cable to ftp into the box or you will use a null modem cable to use the IFA software.
Once your box is up and running again you should able to ftp in if you need to.

[Bazzit]

Using the FTP is much better me thinks

[Jaffa]

Bazzit...it is possible to flash an image using just a crossover cable but as father ted has stated, null modem is more succesful.

If you want to do it with just Xover cable then turn off all firewalls and even turn off any wireless networks, remove power from dbox, then start IFA and load the image and as soon as you hit the start button of IFA, turn the dbox back on. Its all about timing, try again and again and you may just get it right, I have done it lots of times but sometimes it takes more than 10 attempts, thats why I bought a null modem but if you are waiting on it arriving then give it a go with just Xover cable.

[Dreamer]

I Didn't realize you could use IFA with just a crossover.
That's something else I've learnt.

Can you use dreamup with just a crossover?

[Jaffa]

I Didn't realize you could use IFA with just a crossover.
That's something else I've learnt.

Can you use dreamup with just a crossover?

No thats not possible

[Bazzit]

:idea:Used just a Xover last night and it connected fine but
didnt work the LCd said Backup and a little green progress
meter thing filled but nothinghappend after, it tokk about an
hour to do this. Null sounds like the way to go for this
and when back up and runnin I shall take more care what
I flash!!! LOL

[Jaffa]

:idea:Used just a Xover last night and it connected fine but
didnt work the LCd said Backup and a little green progress
meter thing filled but nothinghappend after, it tokk about an
hour to do this. Null sounds like the way to go for this
and when back up and runnin I shall take more care what
I flash!!! LOL

It happens quite a lot and sometimes its not your fault, the image may have been named wrongly and you flash a 1x instead of 2x or vice versa, but you have to look at the bright side and think of the stuff you learn from it happening.

When the IFA program finishes, you usually see wee smilie faces on the lcd and it will say Fertig, then reboot box. Null is the way to go, you dont even need it connected to tv because instructions are on your monitor.

[Bazzit]

I hope this is the correct German term,
Apols if not.

Null is the way when using Flashassistant it worked everytime
in fact I got so carried away I did it several times.

Thanks again for all advice

[Bazzit]

Hi Jaffa

Havin a bit of trouble with FTP with Blade image
the dbox2 password is not working any ideas??
also when you have the Service and Bouquests you want and
drop them in to the config/zappit folder how do
you go about activating them.

Thanks

[wolverine100]

Hi

Had stuck my box into Kein System by Phlashing
a 2x on to my 1x box, Tried to flash an image by using
FlashAssit from the H'berg site, was able to connect fine,
it ran for about an hr the LCD just said back up and a
progress box filled up, on the pc the dialog box just said flashing.
In the end it said FlashA had encountered a problem and needed to
close so no joy.

can any one assist

Thanks

you must take an 1x image for you dbox 2 when you has 1 intel chip