View Full Version : immo off ecu iaw 1ap.81 for saxo
bassit
29th May, 2011, 07:20 PM
hello!
I read tms374 dump from ecu iaw 1ap.81 magneti marelli of saxo citroen.
please need immo off
I checked with writing on 28f512 with willem but witout success.
thanks
kokkinos panos
29th May, 2011, 09:11 PM
here you are:
dont forget the thanks button!:top:
gadroulll
29th May, 2011, 09:45 PM
do not get trouble with tms you can just use a clock file and use the original memory again. you finished
bassit
29th May, 2011, 10:20 PM
here you are:
dont forget the thanks button!:top:
this is the virgin dump or immo off?????????????
must writre on tms374 only??????????????
u think my original dump for tms374 is good????????
bassit
29th May, 2011, 10:22 PM
do not get trouble with tms you can just use a clock file and use the original memory again. you finished
I read tms374 directly, will write on
thsi is enaught???????
or must passed by 28f512????????
thanks
inyxon
29th May, 2011, 10:30 PM
http://www.digital-kaos.co.uk/forums/f178/iaw-1apxx-dump-immo-off-73740/
works ok. I?d prove it.
Post results.
bassit
29th May, 2011, 11:15 PM
http://www.digital-kaos.co.uk/forums/f178/iaw-1apxx-dump-immo-off-73740/
works ok. I?d prove it.
Post results.
i know this method from 28f512
I want from tms374 only!!!!!!!!!
thank u for all
kokkinos panos
30th May, 2011, 05:43 AM
write dump in tms and unplug immobox
job done 100%
churry
30th May, 2011, 06:50 AM
hello!
I read tms374 dump from ecu iaw 1ap.81 magneti marelli of saxo citroen.
please need immo off
I checked with writing on 28f512 with willem but witout success.
thanks
I have this unit I also need to override the ECU and immobilizer.
I read with the developer fails willen g4x and there is no way.
quje apparently the chip is not making good contact with the adapter is defective you must use the adapter.
've managed to read at the end of memory and as I appreciate as I say
thank you very much
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.