alpha 166 transporder

[verica]

hi i have alpha romeo 166 1999 year immo is bosch 2 with eprom 93c56 can somebodu explain me how to prepair transporder with z-bull and witch transporder do i have to use

[verica]

i forgot to tell you key code light is on and car didnt whont to crank

[keygargoil]

this is a 4f similar to a crypto 44 written on a pcf7935 or t15

[keygargoil]

what programming tools do you have i can calculate the pin code for you if you have diagnostic tools

[keygargoil]

is your zed bull chinese or legit you need to use a pcf7935 to produce a chip which will start the car or use ad100 or t300 to programme with pin code

[verica]

i have china z-bull i know pin code but i dont know in z-bull i open file i have three options
1.calculate pin code
2.pre code transporder
3.program transporder
can you help me witch one you uuse first do youy onlu calculate pin code and then program transporder or do you firs make pre code transporder and than program transporder

[verica]

i have silca sbb china also but do you know when i put key light key code on dash must be off if transporder is correct and if i do it with z-bull did i also have to make it with sbb

[keygargoil]

you can produce a chip ready to start the car with zed bull im not sure if the chinese clone has this module but if not i can send you the pin to programme with a t15 id44 chip sbb can do it diagnostically

[keygargoil]

ah right you have 2 options
1 pre programme a transponder and programme with sbb using the calculated pin code or
2 produce a transponder ready to start the vehicle you dont have to pre oprogramme the chip just produce a working chip

[verica]

soryy i wos away i solved car with z-bull make transporder and i start the car :beer: