PDA

View Full Version : DM500S: My channels stopped since two days back.



S2008
17th December, 2008, 09:47 PM
Hi all,

I have DreamBox 500S with software ver (4.2.0.17.12.2007 and CCcam-2.0.8 enigma), my CNBC and BBC lifestyle were showing normally till two days back, however, today I have flashed my DS500s with new image (PL 1.9.0.3.10.2008 and CCcam-2.0.11), and I did satellite search, and I got CNBC and the other channels, but the problem remains.

What I’m missing here?
Thanks in advance.

Moved > Sat Dreambox DF.

opsmonkey
17th December, 2008, 10:21 PM
sorry i cant understand your question..

you had CNBC & BBC Lifestyle..

you reflashed and now you cant get BBC Lifestyle..?

or you cant watch CNBC & BBC Lifestyle..?

Do you have official subs to these channels..?
if not then maybe where you get them from no longer has a sub..

S2008
17th December, 2008, 10:22 PM
Update:

Navigating through my DS500, I found a section in the setup called "Software Management Jada (17 Dec) --> Downloads.

Under that Download there are lots of stuff to choose from, and I really don't know which one to download, the only add-on which is installed on it is the CCcam 2.0.11.

P.S., My DS500 is connected to the Internet, so is there any additional plug-ins that I can install to enable me to watch my channels?

S2008
17th December, 2008, 10:25 PM
you had CNBC & BBC Lifestyle..
Yes.


you reflashed and now you cant get BBC Lifestyle..?

or you cant watch CNBC & BBC Lifestyle..?
They remain encrypted, I thought by flashing anew image would solve the problem.


Do you have official subs to these channels..?
No.

opsmonkey
17th December, 2008, 10:40 PM
no mate the image doesnt clear channels.. thats down to the emu..

what sat is it on.. Thor or Hotbird..?

do you connect to anyone via your db..?

S2008
17th December, 2008, 10:47 PM
no mate the image doesnt clear channels.. thats down to the emu..
Sorry, I'm new to this field, do you mean emulator?


what sat is it on.. Thor or Hotbird..?
Hotbird.



do you connect to anyone via your db..?
When I bought it, the sales person told me to keep it plugged to the Internet to view those channels, and yes, if my internet connection goes off, I cannot view them offline.

opsmonkey
17th December, 2008, 10:54 PM
check you private messages mate.. :)
rules forbid me from chatting about it here

Curious123
17th December, 2008, 11:30 PM
You need to download the satankey bundle and ftp that to your dreambox.

opsmonkey
17th December, 2008, 11:30 PM
take a look at these pdf files

S2008
17th December, 2008, 11:34 PM
Thank you opsmonkey & Curious123, I will do and I'll post the result tomorrow.

alunfennell
18th December, 2008, 12:41 PM
I think he is refurring to Polsat, most of these channels are no longer available using Emu / Keys on Hotbird as they are now Nagra3 as we all know they were apart of the polsat channel list.

S2008
18th December, 2008, 03:27 PM
I understood that the Emu CCcam is used for establishing "C line connection" or "F line sharing" with other peers, so that you don't have to deal with installing or updating the "Keys" locally.

Now if I want to use other emu, which is the best one which has the updated keys available on this site.

opsmonkey
18th December, 2008, 05:14 PM
the ammount of channels that open with keys is very limited..

i can tell you now like alun has that BBC Lifestyle on Hotbird 13E is part of the Polsat service which is Nagravision3.. keys are unavailable

CCcam works fine with keys.. you just need to download and install the following program found in this thread

http://www.digital-kaos.co.uk/forums/f39/mydreambox-keyupdater-v3-19968/

Keys will open very little these days..

All dreambox emu's have the facility to share lines not just ccam

S2008
18th December, 2008, 06:02 PM
Thank you opsmonkey, you are very helpful, however, I did according to the link for PLI as shown below:


Installing MyDreambox Key-Updater v3 for PLI
================================================== =========

MyDreambox utilities for PLI
With DCC place the MD-UTILS.XML into the directory /var/etc/ppanels
Goto your dreambox and push the blue button to access the MENU.
Select installed PPanels


Happy MyDreambox PLI PLUGINS USE

MyDreambox.co.cc

But the problem that the newest version of PMI doesn't allow you to manually install PPanels, it only allows certain types to be downloaded from the Internet!

UPDATE:
Manuel installation worked.....

S2008
18th December, 2008, 07:31 PM
:hmmmm2: Even after installing "MyDreambox KeyUpdater V3", and downloading the keys, not even a single channel cleared!

Is that because I'm using the latest version of PLi and CCcam?

opsmonkey
20th December, 2008, 12:17 AM
hi.. as said before, very few channels clear these days with keys.. please check the encryption of channels you are trying to clear.. many are unopen these days

as for PLi i'm afraid i cant help as i have no experience of this image

coevj
8th March, 2012, 04:59 PM
Hi i'm new here. I had gotten the same trobble.
do you guys think i can get it back on.

i whise to apolagise fore my strange eng. beacase i'm dutch

bayern55
30th October, 2012, 07:31 PM
is there a way that i can easily install cccam on my dreambox like with simple instruction (step by step)