Log in

View Full Version : sprinter 906 virginize


chikiloksik
31st May, 2011, 10:11 PM
Hi boys. I have Mercedes Sprinter 2007y with 2.2 cdi engine, and i have ECU from another Sprinter. ECU is EDC16cp31 without external eeprom. I need virginize this ECU . Read flash and mcu with X-prog M.
I have MB Star C3 to accommodate the ECU . The original ECU was stolen. I need to install another. Number of available ECU 003 446 36 40.
chikiloksik
2nd June, 2011, 05:22 AM
Nobody knows how to make a new block?
MarkPRP
2nd June, 2011, 07:30 AM
how did you connect X prog to this ECU?
chikiloksik
2nd June, 2011, 07:35 AM
how did you connect X prog to this ECU?

through the BDM connector on the back side of the board
milkatrek
2nd June, 2011, 07:50 AM
abritus mb can do that ;)
chikiloksik
2nd June, 2011, 07:59 AM
abritus mb can do that ;)

Unfortunately such a device I do not have to take it nowhere.
I Founded a similar topic in this forum. User wrote that the equipment did not help him solve the problem.
http://www.digital-kaos.co.uk/forums/f178/dodgesprinter-2007-ecu-renew-208278/
Room
2nd June, 2011, 10:54 AM
1. The new unit will require SCN coding online.
2. All who are able to do renew, do it yourself only.
3. It is possible to write the other keys and VIN, but not for free
grigorean_alexandru
9th June, 2011, 01:33 PM
1. The new unit will require SCN coding online.
2. All who are able to do renew, do it yourself only.
3. It is possible to write the other keys and VIN, but not for free

Hello, i had to change the ecu in MB Sprinter 906 3.0CDi, what do i have to do exactly in order to start the car?

Thank you!
Room
9th June, 2011, 04:19 PM
Hello, i had to change the ecu in MB Sprinter 906 3.0CDi, what do i have to do exactly in order to start the car?

Thank you!

It depends what ECU you will use new one or used.
Whether also there is an old ECU available?
grigorean_alexandru
9th June, 2011, 10:35 PM
It depends what ECU you will use new one or used.
Whether also there is an old ECU available?

The car had an engine, now i changed the engine and the ecu that i am having now it supposed to be the ecu of the new changed engine.
When i turn ignition on the lights go on, and all the lights in instruments are turned on for example.
I am not having "start error" but with DAS i found out that there is no start authorization or something like this.

I have STAR and BDM, and i hope i can solve this problem without going to dealer for SCN coding.

Thank you!
MarkPRP
24th June, 2011, 07:54 PM
does anyone have the diagram to connect to the BDM port with X prog please?

I have a vito coming in and it may need a new ecu - so I have a second one Id llike to virginise!
grigorean_alexandru
12th July, 2011, 08:21 AM
Any idea to go further?
Thanks!