inmobilizer dcu3r 8200150542 renault kanggo 1.9d

[churry]

hello friends

need
immobilizer override unit
lucas dcu3r 8200150542
h0m7700111549

Renaul kangoo 1.9d

I need the clean file.
thanks for answering

[lihaven77]

hello friends

need
immobilizer override unit
lucas dcu3r 8200150542
h0m7700111549

Renaul kangoo 1.9d

I need the clean file.
thanks for answering

try this dump virgin

[mihai_vyt]

here you have a working virgin dump

[churry]

thank you very much for the file

already loaded

if it works I tell you.

thanks

[kanzus]

thank you very much for the file

already loaded

if it works I tell you.

thanks

Still waiting for your answer since 2011 ..
;-)

[73n]

Hi. I am not the one, but I just recently bought a second hand Kangoo with this ECU. I discovered steering pump was "bridged" to work because there is eeprom removed in the ECU, car starts but... no pre-heating light and steering pump not working if "unbridged". Because it is the same number (lucas dcu3r 8200150542 hom7700111549) I will try your files and wil let you know, I want to revert all to factory, just with disbaled immo code.

First of all, I need to buy a eeprom programmer and a eeprom, and hope I can try this about a week or two in the future. After that (Do I need to cut pin 20? Do I need to make it WP bit too?

Thanks. I know this is 7 years old post, but never is to late for this kind of things :)

[73n]

Ok Guys. It is working. As I told you earlier I bought a Kangoo without the 25080/95080 eeprom and "bridged" steering pump. I bought a 95080wp, I programmed using a cheap CH341A programmer WITHOUT bridging 5V pin or any other mod suggested in other threads, it just worked ok. I used Asprogrammer to writeprotect. My ECU was exactly same reference as the guy who opened the thread. No need to cut pin20, emulator or other pervert things, just soldering in the right place, also not bridging pins or other things, it was "vanilla" process. I used the Lucas Virgin.rar... really finally I made my own with the dump of the guy who opened the thread with Immo Service Tool 1.2, but I realized that final result was exactly as the LucasVirgin .rar atached earlier to this post, so seems it was made also wit this application.

So... it works, pre-heat light works again, I "unbridged" the steering pump and now is working after starting the car, controled by the ECU. I am happy. Thanks to everyone. Digital Kaos rules!