PDA

View Full Version : Mercedes c200cdi DPF OFF problem



mazilus007
1st June, 2011, 07:06 PM
Hello.
Today I tried to make a Mercedes C200CDI OFF DPF, but after I wrote the car not more than 3000rot revs.
We made the diagnosis with a star and has no error, the only problem is the MassAirFllow which is stuck at 500. I've done with DPF Ecusafe 2.0. Can anyone help me to make this car off the DPF? Or another solution?

mercis
1st June, 2011, 07:55 PM
clear your dpf

djamelEZS
1st June, 2011, 08:32 PM
use ecusafe cracked on this forum and ok thanks

florinyes
1st June, 2011, 08:37 PM
Was the car revving ok before the remap? Try writing ori dump back and check is revs ok, so you can prove is sw or mechanical problem..

Also when you do dpf off, you need to gut the filter and disconnect sensors..

vwpassat
1st June, 2011, 08:39 PM
I am sure he used already, but on the other hand mercis has right.

use ecusafe cracked on this forum and ok thanks

pechvoge1
1st June, 2011, 08:50 PM
turn ignition off and on

mazilus007
2nd June, 2011, 04:51 PM
I have done with Ecusafe2, can anyone verify if the correct tab changed?

mazilus007
2nd June, 2011, 04:54 PM
turn ignition off and on
do not understand anything

vwpassat
14th June, 2011, 08:07 PM
Works just for a short while.

turn ignition off and on