View Full Version : Golf V 2.0 TDI PPD DPF
djorgensen
2nd June, 2011, 10:48 AM
I tried ECU Safe 2, used Kess to read and write
It doesnt work, car in limp mode and the DPF light on
Could someone take a look at the dump attached and point me in the right direction
That a lot guys!
P2XA
2nd June, 2011, 11:03 AM
EcuSafe don't work with PPD.
djorgensen
2nd June, 2011, 11:05 AM
What does work with it?
P2XA
2nd June, 2011, 11:12 AM
You must disable it manually in your flash.
macxlulu
2nd June, 2011, 11:56 AM
try this file and report ,kess cks calculatin in wrinting
djorgensen
2nd June, 2011, 12:34 PM
I just loaded that on without issue.
Its out of Limp mode, but the DPF light remains on as does the warning "diesel particle follow instructions" displayed in the centre of the dash.
macxlulu
2nd June, 2011, 12:40 PM
hmm I'll try to make some improvements:)
djorgensen
2nd June, 2011, 12:50 PM
The light is on the moment you turn the key on, but there are no DTC stored on anything
loading the new dump on now
djorgensen
2nd June, 2011, 12:58 PM
Loaded it on and the problem is still there.
macxlulu
2nd June, 2011, 01:01 PM
Give me a moment
macxlulu
2nd June, 2011, 02:13 PM
send file to pw
djorgensen
2nd June, 2011, 02:18 PM
got it thanks
its made the engine hunt, very rough idle
what i dont understand is why the light and error are coming on before the engine is evening running. Is there some sort of other system like on a PSA car that needs clearning or adapting?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.