PDA

View Full Version : honda civic 2004 needles...



nebojsapejcic
2nd June, 2011, 02:00 PM
I usually do this from the back without taking needles, but someone took it apart , when they up mileage(saving in custom charges). How to calibrate temperature and fuel needle ?

They come out together with spindle (metal part)

digimile
2nd June, 2011, 03:28 PM
hi
its easy to fix its like toothpaste come out from the tube and we need to put it back i try alot but not successful any time.
Hope u make it sorry
thankx

dashradio
2nd June, 2011, 08:22 PM
Take the needle off the spindle, tap it back into motor with the end of a pair of pliers, then if the engine is cold turn on the ignition and set the needle at zero, they drop past when the ignition is off, the fuel is a guess unless they want to fill fuel tank to top, then you can set gauge to full.

nebojsapejcic
2nd June, 2011, 08:44 PM
Thanks guys , for temp I waited until ventilator started blowing and put it right on half. For fuel I took a guess.

Thanks for your help

Motika
2nd June, 2011, 08:58 PM
Just out of interest how do you normally do it from th back that is

nebojsapejcic
2nd June, 2011, 09:11 PM
here is pdf, I took it from here