PDA

View Full Version : marceds E211 0 285 001 441


hamwi
2nd June, 2011, 06:04 PM
hi to all
can any one help me to clear this crash marceds E211
ecu 0 285 001 441
mcu cr16mct5v.
thanks advance.
HONDA C
2nd June, 2011, 06:26 PM
hi to all
can any one help me to clear this crash marceds E211
ecu 0 285 001 441
mcu cr16mct5v.
thanks advance.


HI FRIEND TRY THIS AND REPORT PLEASE
hamwi
2nd June, 2011, 06:33 PM
HI FRIEND TRY THIS AND REPORT PLEASE

I have the same not work.
credoline
2nd June, 2011, 06:39 PM
what errors you have ?
hamwi
2nd June, 2011, 07:16 PM
what errors you have ?

90B0/The control modil N 2/7
HONDA C
2nd June, 2011, 07:16 PM
I have the same not work.


hi .i sent your file to my friend and fix it with mb commander.say maybe the crash file it is not ok .you sure your crash dump is ok? do you want to read it again and post it again then i send it to my friend to fix it again please?
HONDA C
2nd June, 2011, 07:24 PM
90B0/The control modil N 2/7



try this.put the clear dump what you have .put the ecu in the car, open the switch and close after two minutes.take out the ecu and read the dump if it is differend from begin or if you have crash again the problem is sure ecu
hamwi
2nd June, 2011, 07:30 PM
hi .i sent your file to my friend and fix it with mb commander.say maybe the crash file it is not ok .you sure your crash dump is ok? do you want to read it again and post it again then i send it to my friend to fix it again please?

i think that the softwire you are used( air bag version 1.0)not ok
Sergei1956
2nd June, 2011, 08:39 PM
Hi to all
can any one help me to clear this crash Mercedes E211
ecu 0 285 001 441
mcu cr16mct9v.
thanks advance.
HONDA C
3rd June, 2011, 07:04 AM
i think that the softwire you are used( air bag version 1.0)not ok

i sent to my friend and fix it with mb commander like foto .look do you know that sw?
HONDA C
3rd June, 2011, 07:06 AM
Hi to all
can any one help me to clear this crash Mercedes E211
ecu 0 285 001 441
mcu cr16mct9v.
thanks advance.



hi try this from my friend and report and tell me the mb number please
amrif
3rd June, 2011, 11:45 AM
It's sensor from your car or another?
credoline
3rd June, 2011, 03:26 PM
I have the same not work.
My opinion is that clearing from Honda C is good, but somtimes in this CR16 airbags it happends thatsome another bytes be erased and you must write another dump. Use damp from Sergey, clear it and try in your car.